3M Versaflo Filter for use with 3M 800 Series

  • RS Stock No. 190-1898
  • Mfr. Part No. D701
  • Brand 3M
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CA
Product Details

3M™ Secure Click™ Filter Holder D701

The 3M D701 is a filter holder designed to specifically hold 3M ™ Secure Click ™ particle filters D7N11 or D7P71 for 3M ™ Secure Click ™ filters in the D8000 series. These then are intended to be used with the 3M ™ Secure Click ™ 800 Series Respirators. The D701 filter holder can be easily clicked into place quickly making sure you're protected swiftly. The filter is intended for use in environments with solid and non-volatile liquid particles.

Fully compatible with 3M™ Secure Click™ Reusable Respirators 800 Series.

Features and Benefits

• Intended to retain the 3M ™ Secure Click ™ particle filters D7N11 and D7P71
• Intended for 3M ™ Secure Click ™ 800 Series Respirators and 3M ™ Secure Click ™ D8000 Series Filters
• Tough and sturdy filter retainer


Filtered respirator facemasks are essential PPE for environments where particle ingress can be potentially hazardous to your health, such as gas, vapours or dust. They are often more suitable for heavy-duty tasks than disposable facemasks. Replaceable respirator particulate filters are graded in different ways to indicate their suitability for different applications, such as;

• A- Organic vapours with a boiling point more than 65°C
• B- Inorganic vapours
• E- Acid gases
• K- Ammonia and ammonia derivatives
• AX- Organic vapours with a boiling point less than 65°C

Half-mask or full-mask respirators?

Depending on the health and safety requirements of your workplace or the demands of your application, you may need to choose between a half mask or full mask respiratory. Half mask respirators cover only the nose and mouth, while full masks cover the entire face. While both masks may have the same grade of filter, a full face mask has the benefit of sealing around the whole face, creating a more secure seal. Full face masks also have the advantage of protecting the eyes from vapours or splashing. As such, the full face mask option is often a better choice for potentially more hazardous conditions.

However, a half-mask might be a more cost-effective option if extra protection isn't needed, or might be more suitable for use in combination with specialized headgear.

Correct use of respirators

When it comes to respiratory protection, the correct fitting and testing of your respirator is just as important as selecting the correct respiratory protective equipment for your working conditions. Be sure to follow all pertinent instructions and that health and safety best practice is adhered to at all times. Always be sure to use the correct filters for your environment, and make sure the replacement filters are changed as regularly as is recommended.

Attribute Value
For Use With 3M 800 Series
Available to back order for despatch when stock is available
Price 1 Pair
£ 3.70
(exc. VAT)
1 +
Related Products
Solid liquid particles up to 20 x WEL ...
Solid liquid particles up to 20 x WEL (half-mask) or 40 x WEL (full face mask). • 3M™ Particulate Filter• Low breathing resistance• Lighter than conventional filters that provide comparable protection.• Durable, water-resistant and flame retardant.• Bayonet fitting ensures precise & safer locking• Can be used on all 3M 6000, ...
The 3M™ 6099 protects against organic vapours (boiling ...
The 3M™ 6099 protects against organic vapours (boiling point above 65°C, inorganic vapours, acid gases, ammonia and its derivatives, mercury, formaldehyde up to 10ppm and particulates. Suitable for use with 3M™ Reusable Full Face Respirators featuring the Bayonet filter connection system: 3M™ Reusable Full Face Mask 7097S, 3M™ Reusable Full ...
Providing users with breathing protection for hazardous environments ...
Providing users with breathing protection for hazardous environments is at the front line of safety within a multitude of environments, 3M's particulate filter offers protection against solid and liquid particles. Forming part of their 6000 series this filter can connect to any half or full-face reusable mask from 3M that ...
The 3M 3000 series D3125, is a Particulate ...
The 3M 3000 series D3125, is a Particulate Filter designed specifically for particulates that combines a comfortable fit with the utmost protection. These filters employ a lightweight, streamlined design to minimise the feeling of weight and therefore prevent discomfort over longer periods of use. The positioning of the filters ensures ...