RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.

3M 2128 Particulates Filter for use with 3M 2000 Series Respirator

Available to back order for despatch 12/05/2021
Add to Basket

Price 1 Box of 20




RS Stock No.:
Mfr. Part No.:

RoHS Status: Not Applicable

COO (Country of Origin):
Box(es)Per BoxPer unit*
1 - 6£70.99£3.55
7 - 14£68.15£3.408
15 - 39£66.02£3.301
40 +£62.48£3.124
*price indicative

3M™ 2000 Series Particulate Filters

Featured and Benefits

• 3M™ Particulate Filter
• Low breathing resistance
• Lighter than conventional filters that provide comparable protection.
• Durable, water-resistant and flame retardant.
• Bayonet fitting ensures precise & safer locking
• Can be used on all 3M 6000, 3M 7000 & 3M 7500 Series Half Masks and Full Face Masks

P2 Particulate Filter 2125

Solid liquit particles up to 10 x WEL

GP2 Particulate Filter 2128

Solid liquit particles up to 10 x WEL, ozone protection to 10 x WEL and organic vapours / acid gas below WEL

P2/P3 Particulate Filter 2135

Solid liquid particles up to 20 x WEL (half-mask) or 40 x WEL (full face mask)

GP2/GP3 Particulate Filter 2138

Solid liquit particles protection up to 20 x WEL (half-mask) or 40 x WEL (full face mask), ozone to 10 x WEL and organic vapours/acid gas below WEL


Filtered respirator facemasks are essential PPE for environments where particle ingress can be potentially hazardous to your health, such as gas, vapours or dust. They are often more suitable for heavy-duty tasks than disposable facemasks. Replaceable respirator particulate filters are graded in different ways to indicate their suitability for different applications, such as;

• A- Organic vapours with a boiling point more than 65°C
• B- Inorganic vapours
• E- Acid gases
• K- Ammonia and ammonia derivatives
• AX- Organic vapours with a boiling point less than 65°C

Half-mask or full-mask respirators?

Depending on the health and safety requirements of your workplace or the demands of your application, you may need to choose between a half mask or full mask respiratory. Half mask respirators cover only the nose and mouth, while full masks cover the entire face. While both masks may have the same grade of filter, a full face mask has the benefit of sealing around the whole face, creating a more secure seal. Full face masks also have the advantage of protecting the eyes from vapours or splashing. As such, the full face mask option is often a better choice for potentially more hazardous conditions.

However, a half-mask might be a more cost-effective option if extra protection isn't needed, or might be more suitable for use in combination with specialized headgear.

Correct use of respirators

When it comes to respiratory protection, the correct fitting and testing of your respirator is just as important as selecting the correct respiratory protective equipment for your working conditions. Be sure to follow all pertinent instructions and that health and safety best practice is adhered to at all times. Always be sure to use the correct filters for your environment, and make sure the replacement filters are changed as regularly as is recommended.


AS/NZS 1716:2003

Filter TypeParticulates
For Use With3M 2000 Series Respirator