XinaBox - CR01 xCHIP LoRa

  • RS Stock No. 174-3698
  • Mfr. Part No. CR01
  • Brand XinaBox
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

xChip Boards

xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.

xChips are compatible with the platform you want to use and bridges are available for the most popular pltatforms; Raspberry Pi, Minnowboard, Beaglebone, Micro:bit, Pixhawk and 96 boards. Rather than bridging to Ardunio, we offer compatible cores for Arduino Uno, the CC01, and for Arduino Zero, the CC03.

xChips utilise I2C, and due to this bus architecture, unlimited expansion of circuits is possible. Limitations of I2C addresses have been negated by development multiplexers.

Because of its simple connection method, it is easy to build quickly - for prototyping and small product runs

xChips connect to each other using an xBus connector, available from RS 174-4977.

Some xChips need an xPDI connector (RS 174-4974) to connect to programming interfaces, such as the IP02 or IP03.

CR01 – LoRa with Uno Core (433.92 MHz) (RFM96W/RFM96, ATmega328P/ATmega328)

This xChip is a core radio module, based on the ATmega328P, which is a single-chip microcontroller. This xChip also features an on-board RFM96W LoRa module. The ATmega328P is the same architecture as Arduino Pro, allowing users to program in the Arduino IDE and other IDEs supporting the Arduino Pro / Pro Mini, such as PlatformIO and Mbed.

The ATmega328P is Atmel’s 8-bit AVR RISC-based microcontroller that combines 32 kB flash memory, 1 kB EEPROM and 2 kB internal SRAM, running at 16 MHz. This xChip can communicate using I2C, and UART.

This xChip also features an on-board RFM96W LoRa™ module that provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

The LoRa™ module on this xChip is the 433.92 MHz version, which forms part of both the worldwide amateur- and the license-free ISM band for ITU region 1 (EMEA).

Product Features

● 433.92 MHz center frequency
● ATmega328P CPU
● LoRa modem
● Fully static operation
● Built-in temperature sensor with low battery indicator

Applications

● Remote sensing
● Home automation
● Satellite telemetry

Product Specifications

● 168 dB maximum link budget
● +20 dBm – 100 mW constant RF output vs. V supply
● +14 dBm high efficiency PA
● Programmable bit rate up to 300 kbps
● High sensitivity: down to -148 dBm
● Bullet-proof front end: IIP3 = -12.5 dBm
● Excellent blocking immunity
● Low RX current of 10.3 mA 200 nA register retention
● Fully integrated synthesizer with a resolution of 61 Hz
● FSK, GFSK, MSK, GMSK, LoRa™ and OOK modulation
● Built-in bit synchronizer for clock recovery
● Preamble detection
● 127 dB dynamic range RSSI
● Automatic RF Sense and CAD with ultra-fast AFC
● Packet engine up to 256 bytes with CRC

Xinabox Modular Prototyping Boards

Specifications
Attribute Value
Classification Module
Technology MCU
Kit Name XCHIP LoRa
174 In stock for FREE next working day delivery
Price Each
£ 37.51
(exc. VAT)
£ 45.01
(inc. VAT)
Units
Per unit
1 - 1
£37.51
2 - 4
£36.47
5 - 9
£35.01
10 - 24
£34.10
25 +
£33.67
Related Products
From Sensi Edge, the Simba-Pro Sensi BLE IoT ...
Description:
From Sensi Edge, the Simba-Pro Sensi BLE IoT module is a self-contained, certified, microcontroller and Bluetooth Low Energy (BLE) module with a number of sensors. This module can easily be integrated into end designs. It is a cost-effective solution and has low power consumption.The Simba-Pro Sensi BLE IoT module is ...
chili SOM is a System-On-Module by Grinn. The ...
Description:
chili SOM is a System-On-Module by Grinn. The SOM is an ultra-small, low-power, state-of-art module based on ARM Cortex-A8 processor. Easy to embed to a device. Also suitable for applications requiring high degree of density and high computational power. The module has Linux and Android but can operate with other ...
The Pmod ISNS20 is a small current measuring ...
Description:
The Pmod ISNS20 is a small current measuring module based on an Allegro ACS722 Hall Effect current sensor with an ADCS7476 12-bit ADC from Texas Instruments. • Measurement range: ±20A AC/DC• Accuracy: ±2%• Jumper-selected sampling rates: 120Hz, 20k Hz or 80k Hz• 6-pin Pmod connector with SPI interface• Follows Digilent ...
x Chips are a rapid electronics development ecosystem ...
Description:
x Chips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.x Chips are compatible with the platform you want to ...