Maxim MAX17292ETCC+, PWM Voltage Mode Controller, 1 A, 2400 kHz 12-Pin, TQFN

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The MAX17290/MAX17292 high-efficiency, synchronous step-up DC-DC controllers operate over a 4.5V to 36V input voltage range with 42V input transient protection. The input operating range can be extended to as low as 2.5V in Bootstrapped mode. The MAX17290 and MAX17292 use a constant-frequency, pulse-width modulating (PWM), peak current-mode control architecture. There are multiple versions of the devices offering one or more of the following functions: a synchronization output (SYNCO) for 180° out-of-phase operation, an overvoltage protection function using a separate input pin (OVP), and a reference input pin (REFIN) to allow on-the-fly output voltage adjustment.

Increases Design Flexibility
Reduces Power Dissipation
Operates Reliably
Distributed Supply Regulation
General-Purpose Point-of-Load
Offline Power Supplies
Telecom Hardware

Note

Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase.

Specifications
Attribute Value
Number of PWM Outputs 1
Control Method Current
Topology Boost
Maximum Switching Frequency 2400 kHz
Mounting Type Surface Mount
Package Type TQFN
Pin Count 12
Output Current 1 A
Output Voltage 5.45 V
Synchronous Pin Yes
Typical Operating Supply Voltage 4.5 → 36 V
Height 0.75mm
Maximum Operating Temperature +85 °C
Dimensions 3 x 3 x 0.75mm
Length 3mm
Width 3mm
Minimum Operating Temperature -40 °C
Discontinued product
Related Products
Ideal for High-Voltage Current Monitoring Applications Wide 4.5V ...
Description:
Ideal for High-Voltage Current Monitoring Applications Wide 4.5V to 76V Input Common-Mode Range Independent Operating Supply Voltage High Accuracy and Low Quiescent Current Support Precision Application Requirements±0.1% Full-Scale Accuracy Low 100μV Input Offset Voltage Three Gain Versions Available5V/V (MAX4080F/MAX4081F)20V/V (MAX4080T/MAX4081T)60V/V (MAX4080S/MAX4081S)75μA Supply Current (MAX4080)Flexible Current Sensing Supports Monitoring of Charge ...
The MAX17690 is a peak current mode, fixed-frequency ...
Description:
The MAX17690 is a peak current mode, fixed-frequency switching controller specifically designed for the isolated flyback topology operating in Discontinuous Conduction Mode (DCM). The device senses the isolated output voltage directly from the primary-side flyback waveform during the off-time of the primary switch. No auxiliary winding or optocoupler is required ...
BDxx IC0MEFJ-M is a LDO regulator with output ...
Description:
BDxx IC0MEFJ-M is a LDO regulator with output current 1.0A. The output accuracy is ±1% of output voltage. With external resistance, it is available to set the output voltage at random (from 0.8V to 4.5V).It has package type: HTSOP-J8. Overcurrent protection (for protecting the IC destruction by output short circuit), ...
BHxxM0A series are high-performance CMOS LDO regulators with ...
Description:
BHxxM0A series are high-performance CMOS LDO regulators with output current ability of up to 300mA. These devices have excellent noise characteristics despite of their low circuit current consumption of 65μA. They are most appropriate for various applications such as power supplies for logic IC, RF, and camera modules. High Output ...