ON Semiconductor FAN6208MY, Dual-Channel PWM Secondary Side Controller, 8 A, 100 kHz 8-Pin, SOP

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Synchronous Rectifier Controllers, Fairchild Semiconductor

Secondary-side synchronous rectification controllers from Fairchild Semiconductor for use in AC-DC flyback PWM converter applications.

Off-Line & Isolated DC-DC Controllers, Fairchild Semiconductor

The Flyback controllers, Line Level Control (LLC) controllers, and Primary-Side Regulation controllers offer Crucial energy savings to address the needs of Switch Mode Power Supply (SMPS) designs.
All controllers come with integrated soft-start, and protection features from over-voltage, open-feedback, overload, output-short, overcurrent, voltage brownout, and Undervoltage-Lockout.

Specifications
Attribute Value
Number of PWM Outputs 2
PWM Controller Type Secondary Side Synchronous Rectifier
Maximum Switching Frequency 100 kHz
Mounting Type Surface Mount
Package Type SOP
Pin Count 8
Output Current 8 A
Output Voltage 24 V
Typical Operating Supply Voltage 30 V
Dimensions 4.9 x 3.9 x 1.585mm
Length 4.9mm
Width 3.9mm
Height 1.585mm
Maximum Operating Temperature +105 °C
Minimum Operating Temperature -40 °C
860 In stock for FREE next working day delivery
Price Each (In a Pack of 5)
£ 0.46
(exc. VAT)
£ 0.55
(inc. VAT)
Units
Per unit
Per Pack*
5 +
£0.46
£2.30
*price indicative
Packaging Options:
Related Products
Low Input Offset Voltage: 0.5 mV, TypInput Common-Mode ...
Description:
Low Input Offset Voltage: 0.5 mV, TypInput Common-Mode Range includes GroundLow Quiescent Current: 75 μA per Op Amp at VCC = 5 VLarge Output Voltage SwingWide Power Supply Range: 3 V to 36 VHigh ESD Protection: 2 kVEnd ProductsBattery ChargersApplications Switch Mode Power Supplies.
The BD9701 / BD9703 / BD9702 are single-channel ...
Description:
The BD9701 / BD9703 / BD9702 are single-channel step-down switching regulator capable of PWM operation. The Pch MOSFET is built in for high efficiency in small load area. Lower electricity consumption of operating current 4mA (Typ.) and stand-by current 0μA (Typ.) is realized by adopting Bi-CMOS process. Maximum switching current ...
BD62222HFP is full bridge driver for brush motor ...
Description:
BD62222HFP is full bridge driver for brush motor applications. This IC can operate at a wide range of power-supply voltages (from 6V to 27V), supporting output currents of up to 2.5A. MOS transistors in the output stage allow for PWM signal control. The replacement is also easy because of the ...
The LV88551JA/R is the pre-driver for a single-phase ...
Description:
The LV88551JA/R is the pre-driver for a single-phase BLDC motor, which has the closed loop controller for motor rotation speed. This is available to control a motor with low vibration and the low noise. In addition, lead-angle adjustment is possible by external pins. Lead-angle value and lead-angle slant can be ...