ON Semiconductor NCP4306DADZZDASNT1G, PWM Secondary Side Controller, 2 (Source) A, 7 (Sink) A, 1 MHz 6-Pin, TSOP

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

The NCP4306 is high performance driver tailored to control a synchronous rectification MOSFET in switch mode power supplies. Thanks to its high performance drivers and versatility, it can be used in various topologies such as DCM or CCM flyback, quasi resonant flyback, forward and half bridge resonant LLC.

Allows for proper timing of SR MOSFET turn on and turn off
Maximizes conduction time of the MOSFET to increase efficiency
Allows direct connection of CS input to MOSFET drain in flyback applications
Improves performance for applications working in deep CCM
Enters the IC into a low consumption standby mode
Prevents accidental MOSFET turn on or turn off due to ringing
Enhanced Operation for USB-PD Applications
Fast turn off of MOSFET for optimized conduction period
Increased stability coming in and out of Light Load
Wide output operating voltages

Specifications
Attribute Value
Number of PWM Outputs 1
PWM Controller Type Secondary Side Synchronous Rectifier
Maximum Switching Frequency 1 MHz
Mounting Type Surface Mount
Package Type TSOP
Pin Count 6
Output Current 2 (Source) A, 7 (Sink) A
Output Voltage 11 V
Typical Operating Supply Voltage 35 (Maximum) V
Dimensions 3.1 x 1.7 x 1mm
Length 3.1mm
Width 1.7mm
Height 1mm
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
3000 In stock for FREE next working day delivery
Price Each (In a Pack of 10)
£ 0.378
(exc. VAT)
£ 0.454
(inc. VAT)
Units
Per unit
Per Pack*
10 - 90
£0.378
£3.78
100 - 490
£0.265
£2.65
500 - 990
£0.241
£2.41
1000 +
£0.198
£1.98
*price indicative
Packaging Options:
Related Products
The MIC5235 is a 150mA highly accurate, low ...
Description:
The MIC5235 is a 150mA highly accurate, low dropout regulator with high input voltage and ultra-low ground current. This combination of high voltage and low ground current makes the MIC5235 ideal for USB and portable electronics applications, using 1-cell, 2-cell, or 3-cell Li-Ion battery inputs.A μCap LDO design, the MIC5235 ...
Integrated Power DevicePower Device Thermally ProtectedNo External Current ...
Description:
Integrated Power DevicePower Device Thermally ProtectedNo External Current Shunt Required9V to 18V Input RangeInternal Charge PumpA Resistor sets the Current Limit levelA Capacitor programs the Slew Rate of the output at turn on (NIS5132 only).
BD2232G and BD2233G are low on-resistance N-channel MOSFET ...
Description:
BD2232G and BD2233G are low on-resistance N-channel MOSFET high-side power switches, optimized for Universal Serial Bus (USB) applications. BD2232G and BD2233G are equipped with the function of over-current detection, thermal shutdown, under-voltage lockout and soft-start. Low On-Resistance (Typ. 100mΩ) N-channel MOSFET Built-inOutput Discharge FunctionOver-Current DetectionThermal ShutdownOpen-Drain Fault Flag OutputUnder-Voltage LockoutSoft-Start ...
BD82035FVJ is a Single Channel High Side Switch ...
Description:
BD82035FVJ is a Single Channel High Side Switch IC employing N-channel power MOSFET with low on resistance and low supply current for the power supply line of universal serial bus (USB). This IC has a built-in over current detection circuit, thermal shutdown circuit, under voltage lockout and soft start circuits. ...