ON Semiconductor NCP4304AMNTWG, PWM Secondary Side Controller, 5 A, 500 kHz 8-Pin, DFN

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

AC-DC Secondary Side Controllers, ON Semiconductor

Specifications
Attribute Value
Number of PWM Outputs 1
PWM Controller Type Secondary Side Synchronous Rectifier
Maximum Switching Frequency 500 kHz
Mounting Type Surface Mount
Package Type DFN
Pin Count 8
Output Current 5 A
Output Voltage -0.3 → 17 V
Typical Operating Supply Voltage 9.9 V
Dimensions 4 x 4 x 0.95mm
Length 4mm
Width 4mm
Height 0.95mm
Maximum Operating Temperature +150 °C
Available to back order for despatch 26/11/2019
Price Each (On a Reel of 4000)
£ 0.458
(exc. VAT)
£ 0.55
(inc. VAT)
Units
Per unit
Per Reel*
4000 +
£0.458
£1,832.00
*price indicative
Related Products
The NCP4305 is high performance driver tailored to ...
Description:
The NCP4305 is high performance driver tailored to control a synchronous rectification MOSFET in switch mode power supplies. Thanks to its high performance drivers and versatility, it can be used in various topologies such as DCM or CCM flyback, quasi resonant flyback, forward and half bridge resonant LLC. The combination ...
Synchronous rectifiers are used to drive power MOSFETs ...
Description:
Synchronous rectifiers are used to drive power MOSFETs that replace the rectification diodes in the secondary side of SMPS. Therefore, providing high efficiency especially in low-output-voltage, high-current power supplies.
The NCP1034 is a high voltage PWM controller ...
Description:
The NCP1034 is a high voltage PWM controller designed for high performance synchronous Buck dc-dc applications. The NCP1034 drives a pair of external N-MOSFETs using a programmable switching frequency up to 500 kHz which allows flexibility to tune the operation of the IC to meet system level requirements. An external ...
A range of SEPIC DC-DC Converters from Linear ...
Description:
A range of SEPIC DC-DC Converters from Linear Technology which can be used in applications where the output voltage may be either higher or lower than the input voltage. The SEPIC (Single-Ended Primary-Inductor Converter) topology also allows these converters to produce a negative output from a positive input voltage. Some ...