Lattice Semiconductor iCE40LP1K-BLINK-EVN iCEblink40 Evaluation Kit iCEblink40-LP1K

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Lattice iCEblink40-LP1K Evaluation Kit

A low-cost platform for evaluating and developing with the low-power iCE40LP1K FPGA. The board provides access to general-purpose I/O and includes capacitive-touch buttons and LEDs. The board is powered and programmed via USB. An on-board microcontroller enables 2-way communication with the iCE40LP1K FPGA. The free iCEcube2™ development tool controls programming, accesses virtual I/O functions and runs the included demos. The tools can be downloaded from the Lattice website.

Low-power, small-footprint iCE40LP1K FPGA in 84-pin QFNS package
USB programming, debugging, virtual I/O functions, and power supply
4 x User LEDs
4 x Capacitive-touch buttons
3.3MHz clock source
1Mbit SPI serial configuration PROM
Supported by Lattice iCEcube2 design software
63 x LVCMOS/LVTTL (3.3V) digital I/O connections on 0.1in through-hole connections
Supports third-party I/O expansion boards and modules, including 3.3V Arduino Shield boards (requires additional sockets, not supplied)

Supplied with

USB cable for power & programming, QuickStart Guide

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specifications
Attribute Value
Programmable Logic Technology FPGA
Kit Classification Evaluation Kit
Featured Device ICEblink40-LP1K
Kit Name ICEblink40
Available to back order for despatch 24/08/2020
Price Each
£ 120.00
(exc. VAT)
£ 144.00
(inc. VAT)
Units
Per unit
1 +
£120.00
Related Products
USB Type-C and USB-PD Support Supports USB PD3.0 ...
Description:
USB Type-C and USB-PD Support Supports USB PD3.0 Version 1.1 Spec including Programmable Power Supply Mode Configurable resistor RDSupports one USB Type-C port Legacy Charging Sink Block Supports Apple charging 2.4A, USB BC 1.2Integrates all required terminations on D+/D- lines System-Level Fault Protection VBUS to CC Short Protection On-chip overvoltage ...
Driver Support for Windows® 7, Windows Vista®, and ...
Description:
Driver Support for Windows® 7, Windows Vista®, and Windows XP® Operating Systems Enumerates as a Virtual PC COM Port by Use of the Prolific PL-2303HXD USB-to-UART Bridge ICEmulates the DS2480B 1-Wire Line Driving Functionality1-Wire OTP/EPROM Programming Provided Without the Need of an External Power Supply (12V on OW, 7V on ...
The Maxim Integrated evaluation kit (EV kit) provides ...
Description:
The Maxim Integrated evaluation kit (EV kit) provides a proven design to evaluate the MAX17576 high-voltage, high-efficiency, synchronous step-down DC-DC converter. The EV kit is present for 3.3V output at load currents up to 4A and features a 350k Hz switching frequency for optimum efficiency and component size. Adjustable soft-start ...
The 16-Bit 28-Pin Starter Development Board serves as ...
Description:
The 16-Bit 28-Pin Starter Development Board serves as a development kit and evaluation tool for Microchip’s 16-bit ds PIC® digital signal controllers ds PIC30F/33F and PIC24 microcontrollers. Regulators for 3.3V or 5V operation, power input from 9V power supply or USB power source Single UART communication channel via USB bridge ...