MCP6G01T-E/OT Microchip, Programmable Gain Amplifier, Rail to Rail Input/Output, 5-Pin SOT-23

  • RS Stock No. 165-4880
  • Mfr. Part No. MCP6G01T-E/OT
  • Brand Microchip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TH
Product Details

Programmable Gain Amplifiers (PGA), Microchip

Programmable Gain Amplifiers (PGA)

Programmable Gain Amplifiers are Operational, Instrumentation or Differential Amplifiers in which the gain can be programmed or selected, either via hardware (IC pin selection) or software using a serial communications link.

Specifications
Attribute Value
Power Supply Type Single
Typical Single Supply Voltage 3 V, 5 V
Maximum Input Offset Voltage 4.5mV
Number of Channels per Chip 1
Rail to Rail Rail to Rail Input/Output
Mounting Type Surface Mount
Package Type SOT-23
Pin Count 5
Output Type Rail to Rail
Dimensions 3.1 x 1.8 x 1.3mm
Height 1.3mm
Width 1.8mm
Minimum Operating Temperature -40 °C
Length 3.1mm
Maximum Operating Temperature +125 °C
3000 In stock for FREE next working day delivery
Price Each (On a Reel of 3000)
£ 0.238
(exc. VAT)
£ 0.286
(inc. VAT)
Units
Per unit
Per Reel*
3000 +
£0.238
£714.00
*price indicative
Related Products
MAX951ESA+ | MAX951ESA+ Maxim, Comparator, Rail to Rail, ...
Description:
MAX951ESA+ | MAX951ESA+ Maxim, Comparator, Rail to Rail, Swing O/P, 22μs 8-Pin SOIC
Current Sensing Amplifiers have a voltage output that ...
Description:
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.
The NCS214R and NCV214R (AEC- Q100 qualified) are ...
Description:
The NCS214R and NCV214R (AEC- Q100 qualified) are voltage output, current sense amplifiers that can measure voltage across shunts at common−mode voltages from −0.3 V to 26 V, independent of supply voltage. With a fixed gain of 100V/V, the low offset of the zero−drift architecture enables current sensing across the ...
The NCS5651 is a high efficiency, class A/B, ...
Description:
The NCS5651 is a high efficiency, class A/B, low distortion power line driver. It is optimised to accept a signal from a Power Line Carrier modem. It incorporates two Operational Amplifiers (op-amps). The output op-amp is designed to drive up to 2 A peak. At the output current of 1.5 ...