Geckodrive G201X Stepper Motor Controller 7 A, 18 → 80V dc, 2.5 x 0.83 x 2.58in

  • RS Stock No. 793-4127
  • Mfr. Part No. G201X
  • Brand Geckodrive
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

G201X - Step Motor Drive

The G201X is a stepper motor drive with an aluminium case. Drives stepper motors up to 7 Amps.

STEP and DIRECTION inputs are +3.3/5 VDC compatible
Recirculate mode during STANDBY greatly reduces motor heating while stopped
Power-on RESET
Direction is clocked in on the active step pulse edge
DIP switch settings for current and motor version
Needs heatsinking for current settings greater than 3 amps
Low motor heating while stopped
Power supply voltage between 18 and 80 VDC
Aluminium cover and plate
Connector type is Modular, 5mm pitch

Specifications
Attribute Value
For Motor Type Stepper Motor
Current Rating 7 A
Voltage Rating 80 V dc
Board Supply Voltage 18 → 80V dc
Overall Length 2.5in
Overall Width 0.83in
Overall Depth 2.58in
52 In stock for FREE next working day delivery
Price Each
£ 135.76
(exc. VAT)
£ 162.91
(inc. VAT)
Units
Per unit
1 +
£135.76
Related Products
The 514C range of isolated dc motor speed ...
Description:
The 514C range of isolated dc motor speed controllers provide fully regenerative (four quadrant) control of dc shunt and permanent magnet motors. They are particularly suitable for overhauling load applications or where accurately controlled braking is required. Fully regenerative, four-quadrant motor controlInternal logic control of power supply ac contactorRamped speed ...
Linear servo control amplifier used to control motors ...
Description:
Linear servo control amplifier used to control motors up to 50WSuitable for a wide range of motors including the Maxon RE36 and A-Max 324 quadrant operation5 operating modes , (IxR, voltage regulation, digital encoder, dc tacho, current control)External DIP switch setup, potentiometer mode adjustmentLED status indicationRack mounting.
ST5-Si and ST10-Si programmable step drives offer the ...
Description:
ST5-Si and ST10-Si programmable step drives offer the following features:. Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadratureHost control modeIdle current reductionAnti-resonanceTorque ripple smoothingMicrostep emulation8 digital inputs4 digital outputsMay be fitted with option boards to provide an encoder feedback option (ST-ENC, ...
Drives motors up to 40V at 3.5AAdjustable drive ...
Description:
Drives motors up to 40V at 3.5AAdjustable drive current settings from 0.5 to 3.5AOutput overload protectionSynchronisation output for multi-axis systemsFull and half step drive modesTTL & CMOS compatible control interfaceOutput disable input5 & 12Vdc auxiliary outputs for external device energisationStatus LED's for condition monitoringProvision for assembling on-board oscillator with ramp, ...