Keysight Technologies N2870A Oscilloscope Probe, Probe Type: Passive 35MHz 1:1

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Keysight N2870A Series Passive Probes and Accessories

Compact design with a 2.5mm probe tip diameter provides better visibility to the circuit under test than conventional 5mm or 3.5mm probe tips. This makes it easier to probe today’s fine pitched space ICs and components. The replaceable probe tip is also spring loaded, keeping it from slipping off the device being probed. To minimize the inductive effects that cause ringing of high speed signals, the innovative ground blade or spring ground connection can be used. Adhesive copper pads provided with the probe can be attached on top of an IC and connected to its ground pins to create a convenient ground plane for the probe to connect to. When used with the ground blade this method provides an ideal ground connection for probing signals with high frequency contents. The IC cap fits over the probe tip, providing a convenient self-aligning connection to fine-pitch IC pins.

Weight (probe only) 48g
Cable length 1.3m
Operating temperature 0 °C to +50°C
Non-operating temperature -40 °C to +70°C
Operating altitude 2000 m (6,561ft)
Non-operating altitude 15,000m (49,212 ft)
Operating humidity 80% room humidity for temperatures up to 31 °C, decreasing linearly to 40% at 50°C
Pollution degree 2

Note

Probe ID readout: compatible with Agilent's InfiniiVision and Infiniium series oscilloscopes

Supplied with

1 spring-loaded probe tip, 4 spare probe tips (2 spring-loaded and 2 rigid) and 5 different IC caps for IC lead pitches from 0.5mm to 1.27mm

Passive Oscilloscope Probes

Note

All the products in this range are supplied for use with instruments with a permanent earth connection.

Specifications
Attribute Value
Probe Type Passive
Attenuation 1:1
Bandwidth 35MHz
Connector Type BNC
Model Number p N2870A
Safety Category Level CAT II
Safety Category Voltage 55V
Series N287XA
Safety Category CAT II 55V
2 In stock for FREE next working day delivery
Price Each
£ 220.00
(exc. VAT)
£ 264.00
(inc. VAT)
Units
Per unit
1 +
£220.00
Related Products
The RS Pro RS-HF 612RA passive oscilloscope probe ...
Description:
The RS Pro RS-HF 612RA passive oscilloscope probe belongs to a new series of high performance 2.5mm diameter probes. This probe offer 500 MHz bandwidth and has a fixed attenuation of 10:1. In addition, this model is equipped with a readout actuator pin on the BNC connector.The compact design is ...
Solves three longstanding problems by providing: lower DUT ...
Description:
Solves three longstanding problems by providing: lower DUT loading (≤1 pF/1 MΩ probe loading); direct and easy access to SMDs; accesses DUT signals and scope bandwidth for TDS600/700/3000/5000/6000/7000*1 and CSA7000 scopes up to 1 GHz bandwidths. Provides the electrical and mechanical performance required for today's digital systems designs. No additional ...
The P6139B and P5050B are high bandwidth, high ...
Description:
The P6139B and P5050B are high bandwidth, high impedance probes featuring a small probe head and sharp tip that make it easier to probe dense circuitry. The P6139B and P5050B share similar electrical specifications but support Tektronix oscilloscopes with different compensation ranges. Outstanding electrical performance Rugged and easy to use ...
The TPP1000 is a high-bandwidth, general-purpose probe that ...
Description:
The TPP1000 is a high-bandwidth, general-purpose probe that offers breakthrough specifications in its product class. The probe's exceptionally low capacitive loading limits adverse affects on circuits and is more forgiving of longer ground leads. And, with wide bandwidth, users can see the high-frequency components in the signal - which is ...