FTDI Chip, 3.3 V TTL Wire End USB to UART Cable - TTL-232R-3V3-WE

  • RS Stock No. 429-303
  • Mfr. Part No. TTL-232R-3V3-WE
  • Brand FTDI Chip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

FTDI Chip USB To UART Cable

The FTDI chip USB to UART cable is a fast and simple way to connect devices with a TTL level serial interface to USB. It is available with TTL logic level of 3.3V. Each cable contains a small internal electronic circuit board, utilising the FT232R, encapsulated into the USB connector at the end of the cable. The cable has a gauge of 24AWG and diameter of 5mm. They are un-terminated, bare and tinned wires. The circuit is powered from the USB using 5V power pins and any VCC connection, always at 5VDC. These cables are supported with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, and Linux.

Features and Benefits

Connect directly to a microcontroller UART or I/O pins
Data transfer rate is up to 3Mbps
Low USB bandwidth consumption
Maximum output of 250mA on VCC
Operating temperature ranges between -40°C and 85°C
Provides a USB to TTL Serial interface with various end connectors
Powered from USB connector
Six core cable with length of 1.8m
UHCI/OHCI/EHCI host controller compatible
Unique serial number attached, used for security purposes while transferring files via cable
USB 2.0 full speed compatible
Various UART-end connector options available

Applications

Communication
Embedded system

Certifications

CE
FCC approved

Available to back order for despatch 19/10/2020
Price Each
£ 16.33
(exc. VAT)
£ 19.60
(inc. VAT)
Units
Per unit
1 - 9
£16.33
10 - 19
£14.76
20 - 49
£14.02
50 - 99
£13.61
100 +
£12.44
Related Products
The LPRS evaluation kit is an innovative solution ...
Description:
The LPRS evaluation kit is an innovative solution that provides a simple, ready-to-use, flexible platform for testing and evaluation of e RIC and e RA radio transceivers. This kit allows demonstration of the transfer of serial data over the RF link and simple manual/auto transmit/receive modes. The incorporation of GPS ...
The JTAG-HS2 programming cable allows high-speed programming of ...
Description:
The JTAG-HS2 programming cable allows high-speed programming of Xilinx FPGA devices from a host PC. • Compatible with all Xilinx tools• Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)• On-board ADP123AUJZ 300mA voltage regulator• Separate Vref drives JTAG/SPI signal voltages• Vref can be any voltage between ...
The Bridgetek Cle OIO-Shield is an input/output expansion ...
Description:
The Bridgetek Cle OIO-Shield is an input/output expansion shield for Cleo series and belongs to the Cleo accessories family. It is compatible with CleO35, CleO50, NerO, providing easy and extended I/O for analogue, digital, I2C, SPI and UART interface. The I/O features can be connected through Arduino Uno interface, Mikro ...
The ISL32705E is a galvanically isolated, full-duplex differential ...
Description:
The ISL32705E is a galvanically isolated, full-duplex differential bus transceiver, designed for bidirectional data transmission meeting the RS-485 and RS-422 standards for balanced communication. All bus terminals are protected against ±7kV ESD strikes without latch-up.The device uses Giant Magnetoresistance (GMR) as isolation technology. A unique ceramic/polymer composite barrier provides excellent ...