Philips Lighting 36 W Electronic Fluorescent Lighting Ballast, 220 → 240 V

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

High Frequency Dimming

Lamps can be dimmed down to 3%
Can be dimmed from a low voltage potentiometer
Flicker free warm start
Automatic start after lamp replacement
Ideal for daylight and/or presence linking
Low noise operation

Specifications
Attribute Value
Wattage 36 W
Number of Lamps 2
Ballast Type Electronic
Supported Lamp Shape TLD
Supported Lamp Type Fluorescent
Voltage Rating 220 → 240 V
Dimmable Yes
High Frequency Yes
Length 360 mm
Width 30 mm
Height 22mm
Minimum Operating Temperature +5°C
Maximum Operating Temperature +50°C
EU Energy Efficiency Rating A1
Dimming Protocol 1-10V
17 In stock - FREE next working day delivery available
Price Each
Was £56.26
£ 42.20
(exc. VAT)
£ 50.64
(inc. VAT)
Units
Per unit
1 +
£42.20
Related Products
Charger/inverter modules for converting fluorescent luminaires into emergency ...
Description:
Charger/inverter modules for converting fluorescent luminaires into emergency lighting units.,The module and battery packs fit inside most modern fluorescent batten fittings. For luminaires that have limited internal dimensions or that have internal temperatures above 50°C, remote mounting boxes are also available. The remote box is also suitable for converting double ...
The Tridonic 1/2x26-42 TC Pro is an energy ...
Description:
The Tridonic 1/2x26-42 TC Pro is an energy saving long life lighting ballast, specifically designed for 4-pin compact fluorescent lamps. This lighting ballast can run 1 or 2 circular fluorescent lamp. This high frequency ballst has an average life of 50,000 hours. Flicker free operation Low noise Fixed output Safety ...
CELMA Energy Efficiency Index A2 BAT / A2Nominal ...
Description:
CELMA Energy Efficiency Index A2 BAT / A2Nominal life time up to 50000 hours (at 50 °C ambient)Large temperature range Devices can operate either 1 or 2 lamps Intelligent Voltage Guard (overvoltage indication and undervoltage shutdown)Constant luminous flux irrespective of fluctuations in mains voltage For luminaires of protection class I ...
ELT high frequency ballast, Class I for built-in ...
Description:
ELT high frequency ballast, Class I for built-in use. This multipower electronic ballast Operates two T8 lamps. Class I for built in use Ignition with pre-heating in cathodes for long lamp life without flashes and flickering Constant total power and stabilized luminous flux High frequency operation and high energy efficiency ...