SEGGER J-Link ARM JTAG Isolator Board
- RS Stock No.:
- 131-1335
- Mfr. Part No.:
- 8.07.00 JTAG Isolator
- Brand:
- SEGGER
10 In stock - FREE next working day delivery available
1 available from Europe for delivery within 1 working day(s).
Added
Price Each
£231.83
(exc. VAT)
£278.20
(inc. VAT)
| Units | Per unit |
| 1 + | £231.83 |
- RS Stock No.:
- 131-1335
- Mfr. Part No.:
- 8.07.00 JTAG Isolator
- Brand:
- SEGGER
Technical Reference
Legislation and Compliance
Product Details
J-Link ARM JTAG Isolator Board
The J-Link JTAG Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin JTAG-ARM connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.
Compatible Probes
J-Link BASE 131-1319, J-Link PRO, J-Link ULTRA+, J-Link PLUS , Flasher Portable, Flasher ARM
Features
• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• JTAG 20-pin connection with TRST, TDI, TMS, TCK, RTCK, TDO and RESET signals
• Power consumption on target side: 35mA typical
• JTAG frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• JTAG 20-pin connection with TRST, TDI, TMS, TCK, RTCK, TDO and RESET signals
• Power consumption on target side: 35mA typical
• JTAG frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET
Specifications
Attribute | Value |
|---|---|
| For Use With | J-Link Probes |
| Product Type | Programmer |
| Kit Name | J-Link ARM JTAG Isolator Board |
- RS Stock No.:
- 131-1335
- Mfr. Part No.:
- 8.07.00 JTAG Isolator
- Brand:
- SEGGER