Needle Roller Bearing HK 1210, 12mm I.D, 16mm O.D

  • RS Stock No. 514-164
  • Mfr. Part No. HK 1210
  • Brand SKF
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

SKF Drawn Cup Needle Roller Bearings Series HK

SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.

Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required

//media.rs-online.com/t_line/L0514035-01.jpg
//media.rs-online.com/t_line/L0514039-01.gif
Specifications
Attribute Value
Inside Diameter 12mm
Outside Diameter 16mm
Roller Bearing Type Needle
Race Width 10mm
Bore Type Parallel
Material Metal
Static Load Rating 6.4kN
Cage Material Sheet Steel
Number of Rows 1
Dynamic Load Rating 4.84kN
End Type Open
Maximum Speed - Grease 14000rpm
Fatigue Limit Load 710N
Maximum Speed - Oil 20000rpm
Available to back order for despatch 11/11/2020
Price Each
£ 3.27
(exc. VAT)
£ 3.92
(inc. VAT)
Units
Per unit
1 - 4
£3.27
5 - 9
£3.15
10 - 24
£3.07
25 +
£3.01
Related Products
SKF needle roller thrust bearings can support heavy ...
Description:
SKF needle roller thrust bearings can support heavy axial loads, are insensitive to shock loads and provide stiff bearing arrangements which require a minimum of axial space. Single direction bearings and can only accommodate axial loads acting in one direction Particularly compact bearing arrangements can be made, taking up no ...
INA from Schaeffler drawn cup needle roller bearings ...
Description:
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit. Most the bearings are of a single row design ...
Drawn cup needle roller bearings with open ends ...
Description:
Drawn cup needle roller bearings with open ends and with closed end are needle roller bearings with a very small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit. These bearings allow the design of particularly compact ...
Needle roller bearings with ribs are single or ...
Description:
Needle roller bearings with ribs are single or double row units comprising machined outer rings with ribs, needle roller and cage assemblies and removable inner rings. Needle roller bearings with ribs are X-life bearings. These bearings have optimised raceway surfaces. This gives higher load carrying capacity and longer rating life. ...