MikroElektronika mikromedia workstation MCU Development Kit MIKROE-1189

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CS
Product Details

mikromedia workStation v7 for PIC

Mikromedia workStation v7 takes mikromedia boards for PIC microcontrollers as plug-in modules greatly expanding their functionality. An application can be developed on a mikromedia board plugged into this workstation. The mikromedia board can then be removed to operate stand-alone.

mikromedia board socket
Stereo audio power amplifier
2 x on-board miniature loudspeakers
Thumb joystick/navigation switch
Port GPIO pushbuttons and LEDs
RS-232 serial DB9 connector
UART via USB connector
4 x mikroBUS sockets
Piezo buzzer
DS1820 digital temperature sensor
LM35 analogue temperature sensor
2 x analogue inputs with potentiometers
Extra Ground pins for oscilloscope probes
On-board programmer and ICD
On-board 3.3V and 5V power supply regulators
Plug-in breadboard area

Supplied with

User manual, schematic, mikroProg & mikroICD manuals, documentation DVD, USB cable, wire jumpers

Specifications
Attribute Value
Classification Development Kit
Kit Name Mikromedia workstation
Technology MCU
Available to back order for despatch 24/12/2019
Price Each
£ 123.45
(exc. VAT)
£ 148.14
(inc. VAT)
Units
Per unit
1 - 4
£123.45
5 - 9
£111.10
10 - 24
£106.16
25 +
£102.46
Related Products
The SAM4E-EK Evaluation Kit has been designed to ...
Description:
The SAM4E-EK Evaluation Kit has been designed to evaluate the SAM4E16 ARM® Cortex™-M4 microcontroller.What's on-board?•SAM4E16 microcontroller•2.8 in TFT colour LCD display with touch panel and backlight•12 MHz crystal oscillator •32.768 KHz crystal oscillator•NAND flash•Optional SMD connector for external system clock input•UART port with RS232 connector•USART port with RS232 driver•CAN port ...
The board demonstrates the features of the VNI4140K ...
Description:
The board demonstrates the features of the VNI4140K quad high side smart power solid-state relay. The reference design is suitable for use in programmable logic controllers (PLCs) as well as to drive generic loads which require up to 0.7A of nominal current (the typical current limitation is 0.7 to 1.7A). ...
Microstick II is a complete low-cost development hardware ...
Description:
Microstick II is a complete low-cost development hardware platform for Microchip’s 16/32-bit microcontrollers and 16-bit digital signal controllers in 28-pin DIP format. It is designed for insertion into a standard prototyping breadboard for easy connection to additional circuitry. Integrated USB programmer/debugger: no external debugger hardware requiredUSB-powered, no external power supply ...
The EasyMx PRO development board supports the ST ...
Description:
The EasyMx PRO development board supports the ST Microelectronics ARM Cortex-M3 and Cortex-M4 STM32 microcontroller range. The on-board mikroProg programmer and in-circuit debugger support over 180 STM32 microcontroller devices. They feature fast, enhanced programming and a comprehensive set of debugging instructions. Different microcontrollers are supported using special 104-pin plug-in MCU ...