Renesas Electronics Development Kit YDISPLAY-IT-RX71M

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

HMI Solution Kit for RX71M Microcontrollers

The YDISPLAY-IT-RX71M Human Interface (HMI) kit has the same contents as the RX71M Starter Kit apart from the small Pmod debug LCD which is replaced by a large touchscreen LCD on the Direct-Drive header. Supplied with e²studio IDE on DVD ROM.

RX71M RSK+ Starter Kit Main Board
240MHz R5F571MLCDFC (RX71M) MCU with 4MB Flash memory, 64KB Data Flash, 512KB RAM
12MHz R5F10JBCANA (RL78/G1C) MCU for USB-UART bridge
128Mbit SDRAM
16Kbit EEPROM, serial I²C
32Mbit Flash, serial SPI
32Mbit Flash, serial QSPI
2 x RJ45 10/100 Ethernet connectors
1Mbps CAN bus header
miniUSB connector for USB-UART bridge
USB0 Type A FS Host connector
USB0 mini-B FS Function connector
USBA Type A HS Host connector
USBA mini-B HS Function connector
2 x 12-pin Pmod expansion connectors
E1 debug header
SD Flash card slot
CR2032 coin-cell holder for battery backup
4 x User LEDs
Reset pushbutton
User pushbutton
Potentiometer for user analogue input
2.1mm pin-positive barrel jack socket for +5Vdc power supply
Dimensions: 180 x 150mm

YGUI-ADDON-RX LCD Touchscreen Panel
4.3in colour TFT LCD with capacitive touch
Resolution: WQVGA (400 x 240pixel)

Supplied with

Software DVD ROM, E1 Emulator/Debugger pod, YGUI-ADDON-RX LCD Display Panel

Specifications
Attribute Value
Technology Development Kit
Processor Family Name RX71M
Processor Type MCU
Available to back order for despatch when stock is available
Price Each
£ 210.70
(exc. VAT)
£ 252.84
(inc. VAT)
Units
Per unit
1 +
£210.70
Related Products
The Synergy™ SK-S7G2 Starter Kit provides an introduction ...
Description:
The Synergy™ SK-S7G2 Starter Kit provides an introduction to the Synergy Platform S7 series microcontrollers. The kit enables development with the Synergy Platform and allows expansion via connectors and plug-in boards. The Renesas Synergy Software Platform (SSP) integrates proven software including an RTOS, communication stacks, graphics libraries, application frameworks, HAL ...
The YRPBRL78L1A Promotion kit demonstrates the capabilities of ...
Description:
The YRPBRL78L1A Promotion kit demonstrates the capabilities of the RL78/L1A series of 16-bit microcontrollers. This device is aimed at analogue, low-power applications using segmented LCD displays. It is designed to work with e²studio IDE. The board is pre-programmed with a signal generator and oscilloscope demonstration. 24MHz R5F11MPGAFB (RL78/L1A) MCU with ...
The Pmod ACL2 is a 3-axis MEMS accelerometer ...
Description:
The Pmod ACL2 is a 3-axis MEMS accelerometer module featuring the Analog Devices ADXL362 device. • Measurement ranges: ±2g, ±4g, ±8g• Up to 12-bit resolution on each axis• User-selectable resolution• Free-fall detection• 512-sample FIFO buffer• Host communication: SPI bus• Follows Digilent Pmod Interface Specification Type 2A• Activity/inactivity monitoring• Power-saving modes• ...
The Pmod JSTK2 is a two-axis joystick with ...
Description:
The Pmod JSTK2 is a two-axis joystick with a centre button, a trigger button and a programmable RGB LED. • Factory-calibrated 2-axis resistive joystick• Centre joystick pushbutton• Trigger-style pushbutton• Maximum joystick angle: 25° with 10-bit resolution on each axis• 24-bit colour RGB LED• Embedded PIC16F1618 microcontroller• Host communication: SPI bus• ...