RS PRO Pressure Sensor Sealed Gauge

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

The IPSU-M12 series is suitable for use in a wide range of industrial applications. The probe uses a piezo-resistive ceramic sensor, giving excellent media compatibility within a stainless steel housing The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, especially for industrial applications... Each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration data*. Mating cable and plug assemblies are available.

Piezo-resistive thick film ceramic sensor
Stainless steel body
Accuracy <±0.25% FS BFSL
0-5V or 4-20mA outputs
Pressure ranges from -1 to 400 bar
M12 4-pin connector

Specifications
Attribute Value
Pressure Reading Type Sealed Gauge
Minimum Pressure Reading 0psi
Maximum Pressure Reading 3600psi
Accuracy ±0.25 %
Output Type Analogue
Process Connection NPT 1/4
Electrical Connection M12 Connector
Analogue Output 0 → 5 V
Supply Voltage 9 → 32 V dc
Housing Material Stainless Steel
IP Rating IP67
Series IPSU
Mounting Type Threaded
Minimum Operating Temperature -20°C
Maximum Operating Temperature +80°C
Available to back order for despatch 29/01/2020
Price Each
£ 110.87
(exc. VAT)
£ 133.04
(inc. VAT)
Units
Per unit
1 +
£110.87
Related Products
Introducing RS PRO pressure sensors, also known as ...
Description:
Introducing RS PRO pressure sensors, also known as pressure transmitters. These devices change pressure forces into electrical signals. They are used to measure the pressure of the specific quantity like air, water and gas by changing the pressure into electrical energy. The probe uses a piezo-resistive ceramic sensor, giving excellent ...
The IPS-M12 series is suitable for use in ...
Description:
The IPS-M12 series is suitable for use in a wide range of industrial applications. The probe uses a piezo-resistive ceramic sensor, giving excellent media compatibility within a stainless steel housing The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, especially for industrial applications... Each device ...
The RS PRO IPS-M12 series low range pressure ...
Description:
The RS PRO IPS-M12 series low range pressure sensor has a housing made from 316L stainless steel with viton O-ring seals. It uses a piezo-electric silicon sensor. The nominal pressure output of this sensor ranges from 50mbar to 1000bar. It has a 4-pin connector. • Service temperature ranges between -20°C ...
RS PRO Sealed Gauge Pressure Sensor, 1500psi Max ...
Description:
RS PRO Sealed Gauge Pressure Sensor, 1500psi Max Pressure Reading , 9 → 32 V dc, NPT 1/4, IP67