RS PRO ATEX, IECEx Pressure Sensor Gauge
- RS Stock No. 102-4139
- Brand RS PRO
RS Pro IPSS Series ATEX Pressure Transmitters
RS Pro IPSS ATEX industrial pressure transducers are suitable for use in a wide range of industrial applications. A piezoresistive ceramic sensor gives excellent media compatibility within a stainless steel housing.
An incorporated microprocessor-based amplifier, requiring no adjusting, gives stable electronics, especially industrial applications.
Piezo-resistive thick film ceramic sensor
Stainless steel body
+/- 0.25% accuracy
Microprocessor based amplifier
Pressure ranges from 1000 mbar to 100 bar
Note
Temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate.
| Attribute | Value |
|---|---|
| Pressure Reading Type | Gauge |
| Minimum Pressure Reading | 0bar |
| Maximum Pressure Reading | 5bar |
| Accuracy | ±0.25 % |
| Output Type | Analogue |
| Media Measured | Grey Water, Sewage, Viscous Fluid |
| Process Connection | BSP 3/4 |
| Electrical Connection | M12 4-pin |
| Analogue Output | 4 → 20 mA |
| Maximum Current | 28 mA |
| Supply Voltage | 12 → 28 V dc |
| Housing Material | Stainless Steel |
| IP Rating | IP65 |
| Mounting Type | Semi-Flush |
| Maximum Operating Temperature | +80°C |
| Minimum Operating Temperature | -20°C |
| Hazardous Area Certification | ATEX, IECEx |
| Maximum Pressure Setting | 100bar |
