Druck ATEX for Fluid Gauge

  • RS Stock No. 285-289
  • Mfr. Part No. X610-02G-1300
  • Brand Druck
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Druck Precision Pressure Transmitters

Forming part of Druck’s PTX 600 series, this range of pressure transmitters offer a high level of stability, measurement accuracy and stability. Created and designed for critical applications within industrial and research environments, featuring proven silicon technology that has been developed to provide a miniature micro-machined diaphragm. These gauge style pressure sensors are the perfect solution for continuous monitoring in hazardous environments.

Features & Benefits

• Metal seal assembly provides exceptional thermal and stress isolation
• Two-wire electronics includes power supply regulation and amplifier stages
• Independent zero and span controls, zero offset and span setting ±5% site adjustable by sealed, noninteracting potentiometers
• Reverse polarity and over-voltage protection
• RFI bulkhead provides feedthrough filters within the body tube assembly
• The PTX 600 series has a range of 1.5 (100 mbar) through to 10,000 psi (700 bar)
• Rugged compact design
• Great protection against electrical interference
• The transmitter provides an integral female pressure port - 1/4" NPT female
• Fluids compatible with a fully welded assembly of 316 stainless steel and Hastelloy C276 (NACE compatible grades)
• The overall length is 139mm and a diameter of 38mm
• DIN 43650 electrical connector is supplied
• Comprised of hardwearing, aesthetically pleasing stainless steel
• Suitable for use within Zone "O" Gas Group IIC, Temperature Class T4
• G'BSP connection
• Transmitter Supply Voltage: 9-30VDC
• Output Current: 4-20mA (2 wire configuration)
• Temperature effects: less than 0.5% FS over 15° to +122°F- typically 0.3% FS, 15° to +122°
• Gauge configuration (sealed gauge for pressure above 1000 PSI - Absolute for 11.5 to 17 PSI model)

Did you know?

If a product is intrinsically safe, it means that it is incapable of releasing sufficient electrical and thermal energy under normal or abnormal conditions. This results in the item not being able to cause ignition of a specific hazardous atmospheric mixture in its most easily ignited concentration.

Note

Supplied with instruction leaflet, a copy of certificates are available upon request

Specifications
Attribute Value
Pressure Reading Type Gauge
Minimum Pressure Reading 0mbar
Maximum Pressure Reading 250mbar
Accuracy ±0.08 %
Output Type Analogue
Media Measured Fluid
Process Connection G1/4
Analogue Output 4 20 mA
Electrical Connection DIN 43650 Type A
Supply Voltage 9 30 V dc
Housing Material Stainless Steel
IP Rating IP65
Minimum Operating Temperature -10°C
Maximum Operating Temperature +50°C
Hazardous Area Certification ATEX
Available to back order for despatch 31/03/2020
Price Each
£ 713.44
(exc. VAT)
£ 856.13
(inc. VAT)
Units
Per unit
1 +
£713.44
Related Products
Epcos AC-T series pressure transmitters for PCB mounting ...
Description:
Epcos AC-T series pressure transmitters for PCB mounting work to compensate nonlinearity and temperature errors and supply a precise calibrated output signal with a high immunity against electromagnetic influences (EMI) and feature piezoresistive MEMS technology. Dual in-line package for PCB mounting.
For general pressure applications in mechanical, engineering, pneumatics, ...
Description:
For general pressure applications in mechanical, engineering, pneumatics, hydraulics, compressors, pumps and turbines Stainless steel process connection with nickel plated brass housing Ceramic cell with high overload resistance Dry ceramic-capacitive sensor element Standard 4 pole connection Zero point correction +/-5%Plug connection.
Water head pressure equals 100mbar/metre which can be ...
Description:
Water head pressure equals 100mbar/metre which can be measured using submersible pressure transmitters in atmospheric tanks Stainless steel wetted parts Zero/span tolerance; 0.1%Maximum overpressure: 2 x FSElectrical connection via moulded cable suitable for immersion Dimensions: body diameter;27.3mm, body length; 100mm.
Designed for use with aggressive media's found in ...
Description:
Designed for use with aggressive media's found in industrial applications such as Petrochemical, Sewage and Gas pipeline Wetted 17-4 PH stainless steel IP650.25% FS accuracy-40 to +100°C range100 million cycle fatigue life2 c FS proof pressure, 5 x burst Mating connector supplied No need for maintenance or recalibration.