Reliance 7bar Temperature and Pressure Relief Valve with Male BSP 1/2 in BSP Male Connection

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Full Cartridge Pressure and Temperature Relief Valve

All Reliance pressure vessels are supplied with a replaceable membrane, which separates the water and air, to prevent contamination of the water system, corrosion of the pressure vessel or pressure loss in the water system.

Typically pressure vessels are used in pumped systems. When the pump starts, the pressure inside the vessel begins to increase. Once the vessel is full and the pump has reached its high pressure setting it will switch off. When water is then drawn off from the system the air pressure surrounding the membrane will force the water out of the pressure vessel and into the system. Once the membrane is fully deflated and the system has reached its minimum pressure, the pump will start on its low pressure setting and will begin the cycle again.

The purpose of this system is to prevent constant cycling of the pump and continuous running when the system is being used

Protect against temperature rising above 95゚C
Prevent over pressurisation
Twist toop cartridge design for easy servicing
Range of different pressure settings and different probe lenghts

Note

(7948432 no PTFE), (7948439, 7948448 and 7948457 with probe)

Approvals

WRAS

Specifications
Attribute Value
Connection 1/2 in BSP Male
Maximum Set Pressure 7bar
Maximum Temperature +95°C
For Use With Hot Water
Connection Gender Male
Thread Size 1/4in
Thread Standard or Connection Type BSP
1 In stock for FREE next working day delivery
Price Each
£ 56.23
(exc. VAT)
£ 67.48
(inc. VAT)
Units
Per unit
1 - 4
£56.23
5 - 9
£54.50
10 +
£52.75
Related Products
A combined sight glass and check valve used ...
Description:
A combined sight glass and check valve used to visually check the condition and leakage of steam traps. It can be installed horizontally or vertically (bottom to top), downstream of the steam trap. it is constructed with a bronze body, brass cover and borosilicate glass sight tube. The discharge tube ...
RS Screwed End Globe Valves used for regulating ...
Description:
RS Screwed End Globe Valves used for regulating flow in a pipeline and available in a variety of sizes. 1/4"-2" (DN8-DN50)W.P: 200WOGW.T: -20°C-200°C (-4°F-392°F)Investment casting Thread type: ASME B1.20.1 (NPT), DIN 2999 & BS21, ISO7/1 & EN10226.
WRC approved Brass chromium plated reduced bore ball ...
Description:
WRC approved Brass chromium plated reduced bore ball valves manufactured to BS6675Used for isolating hot or cold water systems, to carry out repairs or replacements, without affecting the rest of the system and without having to drain down large volumes of stored water Pressure rating 16 bar at 30°C (cold), ...
Hot pressed, nickel plated brass full bore ball ...
Description:
Hot pressed, nickel plated brass full bore ball valves with Lever style operating handles.,Suitable for oil, air, water, saturated steam or high temperature hot water services in domestic, commercial and industrial applications. Application : Plumbing, Water Operating Temperature : -40゚C (-40゚F) / +170゚C (+350゚F)Operating pressure : PN40 (600 PSI) up ...