Cistermiser Cistern Control Valve, 1/2 in BSP Female

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Valves - Hydraulic

WRAS approved hydraulic water management devices that comply with Bylaw 82 and 83
Standard (STD), low pressure (LP) and high sensitivity low pressure (HSLP) types
Replace trickle - cock in the supply pipe to the cistern
Work by detecting slight changes in water pressure caused when washroom facilities are used
Pass a pre-set amount of water per operation
Stop filling the cistern when the building is empty

Approvals

WRC

Specifications
Attribute Value
Connection 1/2 in BSP Female
Connection Gender Female
Connection Size 1/2in
Thread Standard or Connection Type BSP
8 In stock - FREE next working day delivery available
Price Each
£ 187.25
(exc. VAT)
£ 224.70
(inc. VAT)
Units
Per unit
1 +
£187.25
Related Products
WRC approved Brass chromium plated reduced bore ball ...
Description:
WRC approved Brass chromium plated reduced bore ball valves manufactured to BS6675Used for isolating hot or cold water systems, to carry out repairs or replacements, without affecting the rest of the system and without having to drain down large volumes of stored water Pressure rating 16 bar at 30°C (cold), ...
RS screwed end ball valves for the control ...
Description:
RS screwed end ball valves for the control of flow. Available in a variety of sizes. Investment casting Blow-out proof stem Locking device ISO 5211 Mounting pad TA-Luft approved (option)Length conform to DIN 3202/4-M3-2013SM3 (option)Thread type: ASME B1.20.1 (NPT) DIN2999 and BS21 ISO7/1 and EN10226.
RS Brand Stainless Steel Screwed End Ball Valves ...
Description:
RS Brand Stainless Steel Screwed End Ball Valves for the control of flow. Full port 1/4" to 4" (DN8 to DN100)W.P: 1000 WOG (PN63)W.T: -20°C to 200°CInvestment casting Blow-out proof stem Locking device ISO 5211 Mounting pad Thread type: ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226.
To avoid noise in long runs of pipework ...
Description:
To avoid noise in long runs of pipework and equipment it is desirable to maintain the flow rate less than two litres per second Suitable for use with water or compressed air Can be installed in any position and serviced in situ Single piece acetal resin cartridge Preset pressure40°C maximum ...