RS PRO Pressure Reducing Valve, 1/2 in Screwed Iron Female

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): IT
Product Details

Pressure Reducing Valve - BSP Female

To avoid noise in long runs of pipework and equipment it is desirable to maintain the flow rate less than two litres per second
Suitable for use with water or compressed air
Can be installed in any position and serviced in situ
Single piece acetal resin cartridge
Preset pressure
40°C maximum operating temperature

Note

To facilitate maintenance it is recommended that isolation valves are fitted before and after the pressure reducing valve.
No Gauge port

//media.rs-online.com/t_line/L761345-01.gif
//media.rs-online.com/t_line/L761351-01.gif
//media.rs-online.com/t_line/LI761351-01.gif
Specifications
Attribute Value
Connection 1/2 in Screwed Iron Female
Minimum Outlet Pressure 1bar
Maximum Outlet Pressure 6bar
Body Material Chrome Plated Brass
Maximum Flow Rate 2L/s
Connection Gender Female
Connection Size 1/2in
Thread Standard or Connection Type Screwed Iron
Outlet Pressure Range 1 → 6bar
33 In stock - FREE next working day delivery available
Price Each
£ 40.53
(exc. VAT)
£ 48.64
(inc. VAT)
Units
Per unit
1 +
£40.53
Related Products
Valves are manufactured in accordance with BS 5154 ...
Description:
Valves are manufactured in accordance with BS 5154 PN20 series B and are BSI Kitemark approved.Also suitable for use in class 125 imperial systems specifying valves to BS 1952 at rating: 250 Ibf /in² CWP: 125Ibf/ in² at 353°FSolid wedge disc Non- rising stem Screwed in bonnet Each valve individually ...
WRC approved Brass chromium plated reduced bore ball ...
Description:
WRC approved Brass chromium plated reduced bore ball valves manufactured to BS6675Used for isolating hot or cold water systems, to carry out repairs or replacements, without affecting the rest of the system and without having to drain down large volumes of stored water Pressure rating 16 bar at 30°C (cold), ...
WRAS approved hydraulic water management devices that comply ...
Description:
WRAS approved hydraulic water management devices that comply with Bylaw 82 and 83Standard (STD), low pressure (LP) and high sensitivity low pressure (HSLP) types Replace trickle - cock in the supply pipe to the cistern Work by detecting slight changes in water pressure caused when washroom facilities are used Pass ...
Valves and control modules designed specifically to operate ...
Description:
Valves and control modules designed specifically to operate together, provide a valve opening which is proportional to the input signal and allows this to be correlated to the respective operating conditions. E290 series range of solenoid valves, 2 // 2 N/C piston-type operators for all neutral (bronze) or corrosive (stainless ...