Chauvin Arnoux P01160630 Power Quality Analyser, 1, 3-Phase, 6500A Max, 600V ac Max

Single-phase or balanced three-phase power analyser designed for tradesmen and installers in the public or private construction industry and in maintenance departments.
This economical and easy-to-use analyser is suitable for testing electrical installations, especially those with systems which use power electronics.
The broad range of measurements it provides (VA, VAR, W, PF…) makes this instrument ideal for technical or technological teaching.
Its large graphic display (320 x 240 pixels) serves as a demonstration tool (CA8230 model).
The instrument is easy and pleasant to handle and intuitive to use.
For enhanced simplicity and safety, it automatically recognises the type of sensor connected.
Software PAT (Power Analyser Transfer) greatly increases the instrument's potential in terms of its configuration, and recovery and processing of data on a PC.
Current probes are available as accessories: Ampflex A193 and MN93A.

V Max: 600 VRMS.
I (max) Arms to 3000 A.
Power: 1.2 W → 10 MW - VA, var, PF / Cos / Tan.
Accuracy: 0.5%.
Harmonics: THD, 1 to 50th order rk rms and %.
Values: Min, Max, Peak.
Phase rotation.
Speed of rotation.
Energy measurement.
Temperature (PT100).
Memory: 99 pages max.
Bandwidth: 40 → 70 Hz.
Sampling frequency: 12.8 kHz.
B&W display.

V Max: 600 VRMS.
I (max) Arms to 3000 A.
Power: 1.2 W → 3.4 W - VA, var, PF / Cos / Tan.
Accuracy: 0.5%.
Harmonics: THD, 1 to 50th order rk rms and %, DF.
Values: Min, Max, Peak.
Functions: Threshold monitoring.
Records up to several days.
Event capture.
Energy measurement.
Engine start-up display.
Memory: 1.5 MB.
Bandwidth: 40 → 70 Hz.
Sampling frequency: 12.8 kHz.
Colour display.

The Chauvin Arnoux Single-phase or balanced three-phase power quality analyser is TRMS AC/DC value at the half-period, peak values and THD. This instrument also offers an instant display of the waveform. Short-term flicker measurement is also available. This cost-efficient and easy-to-use analyser are suitable for testing electrical installations, especially those with systems that use power electronics. For enhanced simplicity and safety, it automatically recognises the type of sensor connected. Data viewer software greatly increases the instrument's potential in terms of its configuration and recovery and processing of data on a PC. Current probes are available as accessories: Ampflex A193 and MN93A.

• Maximum voltage: 600VRMS
• Maximum current range: 100mA to 6500AAC and 1A to 1700ADC
• Power: 1.2W to 3.4W - VA, var, PF/Cos/Tan
• Accuracy is 0.5%
• Harmonics: THD, 1 to 50th order rk rms and %, DF
• Values: Minimum, Maximum, Peak
• Functions: Threshold monitoring
• Records up to several days
• Event capture
• Energy measurement and engine start-up display
• Phase rotation with display of phase order in three-phase systems
• Memory is 1.5MB
• Bandwidth is 40Hz and 70Hz
• Sampling frequency is 12.8kHz
• Power supply: Batteries, charge life up to 40 hours
• Colour display

• Power electronics
• Electrical equipment manufacturing

• IP54 rated
• 600 V, Cat. III safety rated
• IEC 61010-1