Fluke I430-FLEXI-TF-II Power Quality Analyser Clamp, Accessory Type Flexible AC Current Probe

  • RS Stock No. 818-7357
  • Mfr. Part No. I430-FLEXI-TF-II
  • Brand Fluke
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): RO
Product Details

i430-Flexi-TF-II 6000A Flexible AC Current Probe

The i430-Flexi-TF-II flexible AC current probe is optimized for current measurement on thick and hard to reach conductors. The i430-Flexi-TF-II is a flexible AC current probe for use with the Fluke 430 series Power Quality Analyzers including Series II.

Measuring range: 0.5 to 6000 A ac
Bandwidth (-3 dB): 10 Hz to 10 kHz
Output signal: 86.6 mV at 1000A/50Hz (on 1 MΩ), 85.0 mV at 1000A/50Hz (on 50 kΩ)
Maximum non-destructive current: 100 kA (50/60 Hz)
Transducer length: 610 mm (24 in)
Transducer diameter: 7.5 mm (0.3 in)
Minimum bending radius: 38 mm (1.5 in)
Cable length from transducer to BNC: 2.5 m (98.4 in)
Complies with: IEC 61010-1: Pollution degree 2, IEC 61010-2-032: 1000V CAT III/ 600V CAT IV, IEC 61010-031

Supplied with

Instruction Sheet

Fluke Flexible AC Current Probe

The Fluke flexible AC current probe has a current measuring range from 0.5A to 6000A. This lightweight measuring head allows quick and easy installation in hard to reach areas, without batteries or an external power source. It is also available as a pack of 4 pieces of the i430 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4 pack is perfect for use with 3-phase tools such as the Fluke 430 series.
Supplied with
Instruction Sheet

Features and Benefits

• Bandwidth (-3dB): 10Hz to 10kHz
• Output signal is 86.6mV at 1000A/50Hz (on 1 Mohm), 85.0mV at 1000A/50Hz (on 50kohm)
• Maximum non-destructive current is 100kA (50/60Hz)
• The transducer length is 610mm (24in)
• The transducer diameter is 7.5mm (0.3in)
• Minimum bending radius is 38mm (1.5in)
• Cable length from transducer to BNC: 2.5m (98.4in)

Certifications


IEC 61010-1: Pollution degree 2
• IEC 61010-2-032: 1000V CAT III/ 600V CAT IV safety rated
• IEC 61010-031
• UL94 approved
• IP41 rated
• CE
• CSA certified

Specifications
Attribute Value
Accessory Type Flexible AC Current Probe
For Use With Fluke 433/434/435/434-II/435-II/437-II
10 In stock for FREE next working day delivery
Price Each
£ 377.00
(exc. VAT)
£ 452.40
(inc. VAT)
Units
Per unit
1 +
£377.00
Related Products
Standard: IEC 1010-1, 600 V Cat. III, deg. ...
Description:
Standard: IEC 1010-1, 600 V Cat. III, deg. 2 if used with a multimeter of the same category. Current probes to measure low DC and AC currents.Easily adapted to all 19 mm standard spacing multimeters.Zero reset using a thumb wheel with disable feature.2 LEDs display overload (red LED) and the ...
Dual range a.c. current clamp nominal measuring ranges ...
Description:
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10k Hz bandwidth Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable Max. conductor size 20mm dia. or 20 x 5mm bus ...
Dual range a.c. current clamp nominal measuring ranges ...
Description:
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10k Hz bandwidth Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable Max. conductor size 20mm dia. or 20 x 5mm bus ...
The E3N current clamp is designed to measure ...
Description:
The E3N current clamp is designed to measure AC and DC current using Hall-effect technology. The clamp is long and narrow in shape for measuring cable cores or in confined spaces. Current range: 0.1A to 10 A peak, 0.5A to 100 A peak Max. jaw insertion capacity: 11.8 mm Zero ...