STMicroelectronics STEVAL-IPFC12V1 2 kW Two-Channel Interleaved PFC Reference Design Based on the STNRGPF12 Digital

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IT
Product Details

The STEVAL-IPFC12V1 2 kW interleaved PFC reference design features the performance of analog cycle-by-cycle current regulation and the flexibility of digital control to generate sinusoidal supplies with very high power factor and very low harmonic distortion.
Digital power control is based on the STNRGPF12 digital PFC controller, which in combination with the TN3050H-12WY thyristor implements digital inrush current limitation, and can drive up to two interleaved PFC channels using mixed signal (analog and digital) average current mode control in CCM at fixed frequency.
The 2 kW interleaved PFC reference design consists of a power board with 2-ch interleaved CCM boost power stage, input rectifier controlled bridge and auxiliary power supply, a control board with embedded STNRGPF12 digital controller and analog control circuitry, and a USB to UART (FTDI cable required - not included in the kit) bridge for programming the STNRGPF12 and performance monitoring.

Specifications
Attribute Value
Power Management Function PFC Controller
Kit Classification Development Board
For Use With Digital Inrush Current Control
Featured Device STNRGPF12
Kit Name 2 kW Two-Channel Interleaved PFC Reference Design Based on the STNRGPF12 Digital Controller
2 In stock - FREE next working day delivery available
Price Each
£ 417.45
(exc. VAT)
£ 500.94
(inc. VAT)
Units
Per unit
1 +
£417.45
Related Products
The EV-VN7008AJ board features the VN7008AJ Smart high-side ...
Description:
The EV-VN7008AJ board features the VN7008AJ Smart high-side driver with Current Sense feedback device designed for Automotive applications. An on-board set of components enables the user to directly connect the load, the power supply and a microcontroller without any additional design effort. • Operating voltage range: +4 to +28Vdc• Maximum ...
The STEVAL-ESC001V1 is an electronic speed controller (ESC) ...
Description:
The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM). It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control applications like electric cars, boats and UAV drones. • 72MHz ...
The STEVAL-LDO001V1 board features four high-performance low-dropout linear ...
Description:
The STEVAL-LDO001V1 board features four high-performance low-dropout linear voltage regulators in miniature packages. They are designed to extend battery life in portable smart devices. • Input voltage range: +1.4 to +5.5Vdc • Dropout voltage: 160mV typical • Quiescent current: 500nA typical • Noise: 6.5μVrms typical • PSRR: Up to 80dB ...
The STEVAL-SPIN3201 board is a three-phase Brushless DC ...
Description:
The STEVAL-SPIN3201 board is a three-phase Brushless DC motor (BLDC) driver board based on the STSPIN32F0 motor controller with embedded STM32F0 MCU. The board is designed for sensored or sensorless vector control, FOC algorithms with 3-shunt sensing. • 48MHz STM32 Cortex-M0 core MCU with 32KB Flash memory, 4KB SRAM • ...