ON Semiconductor NCP1034BCK5VGEVB High Voltage PWM Controller Evaluation Board PWM Controller for NCP1034DR2G for High

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The NCP1034 is a high voltage PWM controller designed for high performance synchronous Buck DC-DC applications. The NCP1034 drives a pair of external N-MOSFETs using a programmable switching frequency up to 500 kHz which allows flexibility to tune the operation of the IC to meet system level requirements. An external synchronization feature allows the simplification of system level filter design. The output voltage can be precisely regulated using the internal 1.25 V reference voltage for low voltage applications. Protections such as under voltage lockout and hiccup current limit are provided to give required system level security in the event of a fault.

Input voltage up to 100V
1.25 V +/-1.5% feedback voltage across temperature
External Frequency Synchronization
Programmable switching frequency up to 500 kHz
2 A Output Drive Capability

Specifications
Attribute Value
Power Management Function PWM Controller
Kit Classification Evaluation Board
For Use With High Voltage PWM Controller
Featured Device NCP1034DR2G
Kit Name High Voltage PWM Controller Evaluation Board
3 In stock - FREE next working day delivery available
Price Each
£ 79.51
(exc. VAT)
£ 95.41
(inc. VAT)
Units
Per unit
1 +
£79.51
Related Products
The Flyback controllers, Line Level Control (LLC) controllers, ...
Description:
The Flyback controllers, Line Level Control (LLC) controllers, and Primary-Side Regulation controllers offer Crucial energy savings to address the needs of Switch Mode Power Supply (SMPS) designs.All controllers come with integrated soft-start, and protection features from over-voltage, open-feedback, overload, output-short, overcurrent, voltage brownout, and Undervoltage-Lockout. Flyback & Forward PWM Controllers, ...
The Pmod DPG1 is a differential pressure gauge ...
Description:
The Pmod DPG1 is a differential pressure gauge module featuring an NXP MP3V5010DP piezoresistive transducer and a Texas Instruments ADCS7476 12-bit ADC. • 0 to 10k Pa differential pressure range• Temperature compensated and calibrated• Host communication: SPI bus• Follows Digilent Pmod Interface Specification Type 2• Dimensions: 25 x 20mm. Pmod ...
The NCP1406 is a monolithic micropower PFM step-up ...
Description:
The NCP1406 is a monolithic micropower PFM step-up DC-DC converter. This device is designed to boost single lithium or two cells AA/AAA battery voltage up to 25 V (with internal MOSFET) output for handheld applications. Target applications include OLED Power, White LED Drivers, and LCD Bias. In addition to standard ...
The NCP1072 / NCP1075 products integrate a fixed ...
Description:
The NCP1072 / NCP1075 products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a PDIP-7 or SOT-223 package, the NCP1072/5 offer a high level of integration, including soft-start, frequency-jittering, short-circuit protection, skip-cycle, a maximum peak current set point, ramp compensation, and a Dynamic Self-Supply ...