RS PRO Power Meter, Absolute Maximum Power Measurement 600kW, Absolute Maximum AC Current Measurement 600A ac

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

RS Pro IPM242 Power Clampmeter

From RS PRO, this IPM242 clamp meter serves as a first line of defence for spot checking and verifying system conditions before deploying more specialised tools. Featuring a full range of diagnostic capabilities including phase sequence, power & power factor, total harmonics distortion & individual harmonics, inrush current and low pass filter, They are rated CAT IV 600 V, CAT III 1000 V with voltage measurement up to 1000 V ac/dc. The new innovative navigation system eliminates confusing push buttons, and replaces them with a single joystick allowing the selection of functions directly on the display.It functions as a multimeter and analyzer with a clamp that is ideal for multifunctions including current and voltage measurements.Battery-powered for maximum portability, and with a large backlit screen, this current clamp meter is ideal for on-the-go applications in almost any environment.It is also supplied in a carry case to keep the clampmeter safe and secure during transit.Features and Benefits 10000 Count digital display Active display backlight and analogue bargraph VoltSense (Non-contact Voltage measurement) True RMS reading on AC and AC+DC mode Auto torch-light for viewing easily while clamping conductors AC 600 Amp capability Auto AC-DC 1000 V capability and selection Auto Ohms/Continuity/Diode selection 100 kΩ resistance capability Continuity beeper Frequency counter Power and power factor measurement Total harmonics distortion and % harmonics 1 to 25 Capacitance capability °C / °F temperature measurement function DC μA for flame rod testing Inrush current Peak HOLD MIN/MAX HOLD Smart Data HOLD Phase rotation indication Low pass filter Auto power off Safety Standard: IEC 61010-1 CAT IV 600 V / CAT. III 1000 V ApplicationsThis multifunction current clamp meter is designed for current measurement in electrical testing, and combines a digital multimeter with a clamping current sensor. The nature of the clamp means that it can fit around a wire at any point to sense AC and DC Current as well as inrush current. This has the advantage of allowing electricians to take a reading from a wire without touching it, which is both more convenient and safer than other methods.They are used for measuring high levels of current in service and maintenance applications. They are also used when installing electrical equipment.True RMS (Root Mean Square) reading has advantages over average RMS reading in that it compensates for interfering electronic loads or distorted sinewaves to give an accurate reading.Why RS PRO?RS PRO aims to be your go-to brand when you need reliability, quality, and affordability. We source high-quality tools and parts from trusted sources and employ expert testing to build a brand you can rely on.When it comes to test and measurement equipment, RS PRO has an extensive range of solutions. From electrical to environmental measurement, we offer calibrated and multi-function instruments to suit your needs.

Supplied with

IPM242 power clamp meter, test leads set (1 x black & 1 x red), temperature probe, carrying case, 9 V alkaline battery (supplied and pre-installed) and instruction manual

Specifications
Attribute Value
Absolute Maximum Power Measurement 600kW
Weight 435 (with Battery)g
Calibrated RSCAL
Absolute Maximum AC Current Measurement 600A ac
Absolute Maximum DC Current Measurement 1mA dc
Absolute Maximum DC Voltage Measurement 1000V dc
Best DC Voltage Accuracy ±0.7 % + 2 Digits
Best AC Voltage Accuracy ±1 % + 5 Digits
Best AC Current Accuracy ±1.5 % + 5 Digits
Best DC Current Accuracy ±1.7 % + 2 Digits
Maximum Power Factor Measurement +1
Minimum Power Factor Measurement -1
Power Source Battery
Battery Type 9 V Alkaline (IEC 6LF22), 9 V Alkaline (NEDA 1604A)
Dimensions 87.5 x 50.5 x 242mm
Height 242mm
Width 50.5mm
Maximum Operating Temperature +50°C
Length 87.5mm
Minimum Operating Temperature 0°C
18 In stock for delivery within 2 working days
Price Each
£ 255.64
(exc. VAT)
£ 306.77
(inc. VAT)
Units
Per unit
1 +
£255.64
Not available for guaranteed pre 9am/10am delivery
Related Products
The DCM305E is designed to check earth leakage ...
Description:
The DCM305E is designed to check earth leakage currents, however the upper range enables TRMS AC current measurements of up to 100 A. TRMS meters can measure both pure, undistorted, sinusoidal AC waveforms and non-sinusoidal AC waveforms which can contain pulse trains, triangles, spikes and other ragged waves.The instrument has ...
The 316 is the perfect Clamp Meter for ...
Description:
The 316 is the perfect Clamp Meter for many electronic applications. Because this meter was designed to measure smaller amounts of current it is ideal for quick non-intrusive current measurements. Auto power off4 Digit LCD display Low battery indicator0.49" Clamp opening Overload protection AC/DC Amp ranges 10A, 80A & 100A1mA ...
Fully IEC1010-1 and IEC101-2-032 compliant for circuits up ...
Description:
Fully IEC1010-1 and IEC101-2-032 compliant for circuits up to 500V phase to phase or 300V phase to earth CAT III or 600V CAT II30mA and 300mA ranges for leakage current measurement0.01mA resolution on 30mA range30A and 300A ranges for power measurements Data hold facility Maximum conductor size 40mm diameter3200 count ...
4000 count LCD display AC & DC Current ...
Description:
4000 count LCD display AC & DC Current Measurement True RMS measurements with auto range High noise rejection ideal for testing AC power distribution control gear and AC/DC inverter drive systems High external field rejection High accuracy over full range Simple push button for data hold and auto zero Low ...