STMicroelectronics EVAL6470H-DISC Motor Driver for L6470

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Evaluation Board for L6470 Motor Driver

STMicroelectronics EVAL6470-DISC is a development tool to help evaluate the L6470 motor driver. The ST's eval board is an easy to use starter kit that can be used with a software interface or with custom firmware due to the embedded microcontroller.
“Plug and Play” tool offers good motor control flexibility due to the wide operating voltage range and the current capability. The on board LED display shows ready, busy and error warning.

Voltage mode driving featuring extreme smoothness
Up to 1/128 microstepping
Fully autonomous solution embedding an STM32™ MCU and the L6470H stepper motor driver
Compatible with SPIN family evaluation software
Wide voltage range from 8 V to 45 V
High phase current up to 3 Ar.m.s
Footprint optimized for external resonator or crystal
Switch motor input control
Keys start/left - stop/right - reset
Ready, busy, error LED indicators
Spare LED indicators for specific design
Adjustable supply voltage compensation

Motor Controllers & Drivers, STMicroelectronics

Specifications
Attribute Value
Power Management Function Motor Driver
Kit Classification Development Board
Featured Device L6470
8 In stock for FREE next working day delivery
Price Each
£ 21.30
(exc. VAT)
£ 25.56
(inc. VAT)
Units
Per unit
1 +
£21.30
Related Products
The LB1838M is 2-channel low-voltage, low saturation voltage ...
Description:
The LB1838M is 2-channel low-voltage, low saturation voltage type bidirectional motor driver IC that is optimal for use as 2-phase stepping motor driver in printers, floppy disk drives, and cameras and other portable equipment. The output circuits are of the bipolar type, with pnp transistors in the upper side and ...
The LB1938FA is an H-bridge motor driver that ...
Description:
The LB1938FA is an H-bridge motor driver that supports low-voltage drive and features low-saturation outputs in an ultra-miniature slim package. The LB1938FA provides forward, reverse, brake, and standby modes controlled by two input signals, and is an optimal DC motor driver for notebook personal computers, digital cameras, cell phones, and ...
The LB1909MC is a low saturation voltage stepping ...
Description:
The LB1909MC is a low saturation voltage stepping motor driver IC. It is optimal for motor drivers in 12V system products. Current consumption 0 in standby modeThe compact package (MFP-10S) is adopted. VCC max = 20V, IO max = 0.8ABIP output transistor adoption (Upper and lower total Vo(sat)=0.5V(typical) at Io=400mA). ...
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver ...
Description:
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver expansion board based on the STSPIN220 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. • Operating voltage range: +1.8 to +10Vdc • Output current: 1.3Arms ...