STMicroelectronics EVAL-L9958 Motor Driver for L9958

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

L9958 Evaluation Board for High Current DC/Stepper Motors

The board evaluates the L9958, an SPI Controlled H-Bridge. It is designed to control DC or Stepper motors with diagnostic functions monitoring. The H-Bridge is protected against over temperature, short circuits and includes undervoltage/overvoltage lockout for the supply voltages.

Wide supply voltage range 4V to 28V
Current regulation in 4 threshold levels set by SPI: 2.5A to 8.6A
SPI serial bus controlled and programmed
SPI Diagnostic functions reporting
5V Voltage regulator (1.5A) On board
Compatible with 5V and 3.3V level control
No heat-sink is required

Motor Controllers & Drivers, STMicroelectronics

Specifications
Attribute Value
Power Management Function Motor Driver
Kit Classification Evaluation Board
Featured Device L9958
11 In stock for FREE next working day delivery
Price Each
Was £61.79
£ 45.08
(exc. VAT)
£ 54.10
(inc. VAT)
Units
Per unit
1 +
£45.08
Related Products
Installed with the Freescale MPC17531 DC motor driver ...
Description:
Installed with the Freescale MPC17531 DC motor driver ICDual Full-Bridge Drivers installed (can drive 1 or 2 small DC motors, or one 2-phase stepping motor)Can control high-speed 200 kHz PWMsEquipped with low power consumption mode and circuit to prevent faulty operation under low voltageSmall Module, 16-pin DIP, IC pin layoutLow-loss ...
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver ...
Description:
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver expansion board based on the STSPIN220 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. • Operating voltage range: +1.8 to +10Vdc • Output current: 1.3Arms ...
The Si875x evaluation boards are ideal for driving ...
Description:
The Si875x evaluation boards are ideal for driving power switches and evaluate the Si8751 and Si752 isolated MOSFET drivers.Isolation voltage rating up to 2.5 kV RMS, supporting UL1577 and VDE0884 standards. Supports both DC or AC load switchingJumper to evaluate Miller Clamp functionSi8751-KIT with digital input (2.25 V to 5.5 ...
PWM driver click is a mikroBUS add-on board ...
Description:
PWM driver click is a mikroBUS add-on board for controlling the DC motor speed or fast switch ON/OFF a DC load circuit. The Silicon Labs Si8711CC is a 5kV Digital Isolator with LED Emulator Input and Open Collector Output. A Pulse Width Modulation signal in the Digital Isolator drives the ...