- RS Stock No.:
- 188-8270
- Mfr. Part No.:
- EVALSTPM32
- Brand:
- STMicroelectronics
Available to back order for despatch 28/08/2024
Added
Price Each
£76.55
(exc. VAT)
£91.86
(inc. VAT)
Units | Per unit |
1 - 1 | £76.55 |
2 - 4 | £74.54 |
5 - 9 | £72.63 |
10 + | £70.81 |
- RS Stock No.:
- 188-8270
- Mfr. Part No.:
- EVALSTPM32
- Brand:
- STMicroelectronics
Technical Reference
Legislation and Compliance
Product Details
The STPM32 energy metering evaluation board is a class 0.2, single-phase meter with shunt current sensor for power line systems with Vnom= 140 to 300 V(RMS), Inom/ Imax= 5/100 A(RMS), flin= 50/60 Hz ± 10% and Tamb= -40 to +85 °C.
Measured active/reactive power can be output from two programmable LEDs on the board. The board can be interfaced with a PC running evaluation software through an isolated RS232 port, or through the STEVAL-IPE023V1 USB isolated interface tool for configuration and data reading. The board also has SPI/UART pins available to interface a microcontroller for application development.
Measured active/reactive power can be output from two programmable LEDs on the board. The board can be interfaced with a PC running evaluation software through an isolated RS232 port, or through the STEVAL-IPE023V1 USB isolated interface tool for configuration and data reading. The board also has SPI/UART pins available to interface a microcontroller for application development.
0.2% accuracy single-phase meter
Vnom(RMS) = 140 to 300 V, Inom/Imax(RMS)= 5/100 A, flin= 50/60 Hz ± 10%
Connector for USB isolated hardware programmer tool STEVAL-IPE023V1 and PC GUI
RS232 and UART isolated connectors to PC GUI
SPI/UART switch for device peripheral selection
2 programmable LEDs on board
Digital expansion to external system-on-chip or MCU
3.3 V power supply: external or through STEVAL-IPE023V1 isolated USB board
Vnom(RMS) = 140 to 300 V, Inom/Imax(RMS)= 5/100 A, flin= 50/60 Hz ± 10%
Connector for USB isolated hardware programmer tool STEVAL-IPE023V1 and PC GUI
RS232 and UART isolated connectors to PC GUI
SPI/UART switch for device peripheral selection
2 programmable LEDs on board
Digital expansion to external system-on-chip or MCU
3.3 V power supply: external or through STEVAL-IPE023V1 isolated USB board
Specifications
Attribute | Value |
---|---|
For Use With | Shunt Current Sensor Based on the STPM32 |
Kit Classification | Evaluation Board |
Featured Device | STEVAL-IPE023V1 |
Kit Name | Single-Phase Energy Metering Evaluation Board |
Related links
- STMicroelectronics AEK-MOT-SM81M1 for L99SM81V for L99SM81V
- STMicroelectronics Evaluation Board for PM8805 for Wireless Access Points
- STMicroelectronics EVSPIN32F06Q1 3-Phase Inverter for PIN32F06Q1S3...
- STMicroelectronics Buck Converter
- STMicroelectronics EVALSTISO62XV1 Digital Isolator for STISOxxx for STISO62
- STMicroelectronics SRK1000B Adaptive Synchronous Rectification...
- STMicroelectronics SSR Flyback converter for VIPer318L for...
- STMicroelectronics VND9025AJ Evaluation Board Evaluation Board for...