STMicroelectronics EVALSP820-XS Compact Evaluation Board for STSPIN820 Stepper Motor Driver Motor Driver

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The EVALSP820-XS is a compact and easy to use evaluation board for the STSPIN820.
It provides a very compact solution to evaluate the performance of the STSPIN820 stepper motor driver with a minimum set of additional equipment and without the need of additional devices.
The hardware is fully compatible to be used together with RAMPS or other similar FFF 3D printing platforms, representing a very fast drop-in replacement of similar solutions. Contrary to most other competitors solutions, the EVALSP820-XS helps customers to really exploit the benefits of working at high microstepping resolution.

Simple step and direction control interface
Adjustable current control through a potentiometer to set the ref. voltages
Embedded PWM current control with selectable decay mode (fast or slow)
Full set of embedded protections
Non-dissipative overcurrent
Undervoltage lockout
Thermal shutdown

Specifications
Attribute Value
Power Management Function Motor Driver
For Use With STSPIN820
Featured Device EVALSP820-XS
Kit Name Compact Evaluation Board for STSPIN820 Stepper Motor Driver
Available to back order for despatch 13/02/2019
Price Each
£ 6.70
(exc. VAT)
£ 8.04
(inc. VAT)
Units
Per unit
1 +
£6.70
Related Products
Description:
The Stepper 3 click is an add-on board that driver unipolar stepper motors with precise controls. A high-voltage, high-current Darlington Transistor Array (Texas Instruments ULN2003A) operates the motor windings. Individual motor phases can be accessed separatelyExternal motor power supply up to 30 V dc capable of 500 mA (single output ...
The LB1938FA is an H-bridge motor driver that ...
Description:
The LB1938FA is an H-bridge motor driver that supports low-voltage drive and features low-saturation outputs in an ultra-miniature slim package. The LB1938FA provides forward, reverse, brake, and standby modes controlled by two input signals, and is an optimal DC motor driver for notebook personal computers, digital cameras, cell phones, and ...
The LB1909MC is a low saturation voltage stepping ...
Description:
The LB1909MC is a low saturation voltage stepping motor driver IC. It is optimal for motor drivers in 12V system products. Current consumption 0 in standby modeThe compact package (MFP-10S) is adopted. VCC max = 20V, IO max = 0.8ABIP output transistor adoption (Upper and lower total Vo(sat)=0.5V(typical) at Io=400mA). ...
The ISL95852EVAL1Z Evaluation Board demonstrates the performance of ...
Description:
The ISL95852EVAL1Z Evaluation Board demonstrates the performance of the ISL95852. The Power Management Integrated Circuit (PMIC) converts the system voltage from a battery or mains adapter into the three necessary processor voltages. Efficient high frequency-integrated FET switching regulatorsMeet Intel’s IMVP8 specificationsExtensive fault protection with Overcurrent, overvoltage and over-temperature protectionTemperature alert ...