ON Semiconductor NCP3337MNADJGEVB Adjustable Output Voltage LDO Regulator Evaluation Board LDO Voltage Regulator for

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The demo board supports the LDO regulator NCP3337 in DFN10 package with adjustable output voltage. The ENABLE function allows turn the device to low consumption mode with quiescent current below 1 μA. The Power Good pin allows output voltage monitoring. The additional CNR capacitor reduces the output noise. Size: 45mm x 30mm x 18mm

High Accuracy Over Line and Load (±0.9% at 25°C)
Ultra-Low Dropout Voltage at Full Load (260 mV typ.)
No Minimum Output Current Required for Stability
Low Noise (33 _Vrms w/10 nF Cnr and 52 _Vrms w/out Cnr)
Low Shutdown Current (< 1 mA)
Reverse Bias Protected
2.9 V to 12 V Supply Range
Thermal Shutdown Protection
Current Limitation
Stable with Any Type of Capacitor (including MLCC)
Power Good Output
PCMCIA Card
Cellular Phones
Camcorders and Cameras
Networking Systems, DSL/Cable Modems
Cable Set-Top Box
MP3/CD Players
DSP Supply
Displays and Monitors

Specifications
Attribute Value
Power Management Function LDO Voltage Regulator
Kit Classification Evaluation Board
For Use With Adjustable Output Voltage LDO Regulator
Featured Device NCP3337MNADJR2G
Kit Name Adjustable Output Voltage LDO Regulator Evaluation Board
Available to back order for despatch 11/08/2020
Price Each
£ 29.79
(exc. VAT)
£ 35.75
(inc. VAT)
Units
Per unit
1 +
£29.79
Related Products
The ISL85003DEMO1Z and ISL85003ADEMO1Z Demonstration Boards are based ...
Description:
The ISL85003DEMO1Z and ISL85003ADEMO1Z Demonstration Boards are based on the ISL85003(A), a Highly Efficient 3 A Synchronous Buck Regulators with integrated high-side and low-side FETs. They are intended for point-of-load applications. Input voltage from 4.5 V to 18 VContinuous output current up to 3 ACurrent mode control Automatic switch between ...
The ISL8026 and ISL8026A Evaluation Boards demonstrate the ...
Description:
The ISL8026 and ISL8026A Evaluation Boards demonstrate the features of the highly efficient, synchronous step down DC-DC converters. Up to 95% efficiency Input voltage from 2.5 V to 5.5 V 1% reference accuracy over variations in load/line/temperature Start up with pre-biased output Internal soft-start (1 ms or adjustable)Soft-stop output discharge ...
The MIC28515 75V/5A HLL Step Down Evaluation Board ...
Description:
The MIC28515 75V/5A HLL Step Down Evaluation Board allows for the evaluation of the MIC28515 Syncronous Buck Switcher over an input supply range of 4.5V to 75V while providing 5A. The device operates with a programable switching frequency from 270k Hz to 800k Hz and with two selectable modes: CCM ...
The NCP785AH33GEVB Evaluation Board supports the Ultra High ...
Description:
The NCP785AH33GEVB Evaluation Board supports the Ultra High Voltage Linear Regulator regulator NCP785A in SOT89-3 package with fix output voltage 3.3V. Ideal for high input voltage applications such as industrial and home metering, home appliances. The NCP785A family offers 5% initial accuracy, extremely high?power supply rejection ratio and ultra?low quiescent ...