STMicroelectronics X-NUCLEO-PLC01A1 PLC Driver for STM32 Nucleo

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

X-NUCLEO-PLC01A1 Industrial PLC Expansion Board

The X-NUCLEO-PLC01A1 is an input/output expansion board which provides an STM32 Nucleo MCU board with industrial PLC (Programmable Logic Controller) functionality.

• 8 x inputs protected by a CLT01-38SQ7 digital termination array • 8 x outputs driving a VNI8200XP octal high-side solid-state relay
• Host communication: SPI bus protected by on-board Si8661 digital isolator
• Status LEDs: Power OK, SPI Activity, Fault, Over-temperature
• 16 x I/O activity LEDs
• Screw connectors for all protected I/O
• Compatible with STM32 Nucleo-64 MCU boards
• Arduino Uno r3 compatible Shield headers
• Designed for situations required to pass IEC61000-4-2 8kV and 15kV test standards
• Free development firmware and example library compatible with STM32Cube firmware

Suitable STM32 Nucleo MCU Boards

802-9412 NUCLEO-F030R8 Cortex-M0 core processor 802-9416 NUCLEO-F103RB Cortex-M3 core processor
802-9425 NUCLEO-F401RE Cortex-M4F core processor

STM32F4 Series 32-Bit ARM Cortex-M4 Microcontrollers, STMicroelectronics

The ARM Cortex-M4 based STM32 F4 series of high-performance MCUs with DSP and FPU instructions is an extension of the industry-leading STM32 portfolio towards even higher performance. Up to 180 MHz operating frequency.

Up to 2x USB 2.0 OTG FS/HS
SDIO (Secure Digital Input Output)
USART, SPI, I²C
I²S (Inter-IC Sound) + Audio PLL
16 and 32 Bit Timers
Up to 3x 12-Bit ADC
Low Voltage 1.7 V to 3.6 V

Specifications
Attribute Value
Power Management Function PLC Driver
Kit Classification Expansion Board
For Use With STM32 Nucleo
Available to back order for despatch 14/04/2020
Price Each
£ 19.70
(exc. VAT)
£ 23.64
(inc. VAT)
Units
Per unit
1 +
£19.70
Related Products
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver ...
Description:
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver expansion board based on the STSPIN220 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. • Operating voltage range: +1.8 to +10Vdc • Output current: 1.3Arms ...
The EV-VN7008AJ board features the VN7008AJ Smart high-side ...
Description:
The EV-VN7008AJ board features the VN7008AJ Smart high-side driver with Current Sense feedback device designed for Automotive applications. An on-board set of components enables the user to directly connect the load, the power supply and a microcontroller without any additional design effort. • Operating voltage range: +4 to +28Vdc• Maximum ...
High voltage rail up to 1700 VDriver current ...
Description:
High voltage rail up to 1700 VDriver current capability:4 A source/sink at 25 °CSeparate sink and source for simplified gate driving configuration 4 A Miller clamp Short propagation delay: 100 ns UVLO function Gate driving voltage up to 26 VNegative gate driving On-board isolated DC-DC converters to supply gate drivers, ...
Operative voltage from 7 to 45 VOutput current ...
Description:
Operative voltage from 7 to 45 VOutput current up to 1.5 Arms Supporting single shunt and three-shunt sensing Standby mode Flexible direct driving settable between 3 or 6 PWM inputs Current limiter with adjustable reference Overcurrent, short-circuit and interlocking protections Thermal shutdown and undervoltage lockout BEMF sensing circuitry Bus voltage ...