Intersil HIP2103_4MBEVAL1Z Half-Bridge Driver

  • RS Stock No. 121-5920
  • Mfr. Part No. HIP2103_4MBEVAL1Z
  • Brand Intersil
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

HIP2103/HIP2104, Half Bridge Motor Driver Evaluation Kit, Intersil

The HIP2103_4MBEVAL1Z mother board with the HIP2103DBEVAL1Z and
HIP2104DBEVAL1Z evaluation daughter cards constitute an evaluation tool for the HIP2103 and HIP2104 half bridge MOSFET drivers.
The motherboard platform provides an on-board microcontroller that is used to generate appropriate control inputs to the HIP2103 or HIP2104. DIP switches on the mother board setup the desired PWM frequency and dead-time. A potentiometer adjusts the The PWM duty cycle.

MOSFET bridge supply voltage from 5 V to 50 V dc
3.3 V or 5 V microcontroller compatible inputs
MOSFET bridge supply Current 20A Maximum
PWM Switching Frequency 5kHz to 40kHz in 5kHz increments
Half Bridge driver for brushed DC motors and Brushless DC (BLDC) motor applications

Motor Controllers & Drivers, Intersil

Specifications
Attribute Value
Power Management Function Half-Bridge Driver
Kit Classification Evaluation Board
Available to back order for despatch 06/07/2020
Price Each
£ 56.73
(exc. VAT)
£ 68.08
(inc. VAT)
Units
Per unit
1 +
£56.73
Related Products
The LB1938FA is an H-bridge motor driver that ...
Description:
The LB1938FA is an H-bridge motor driver that supports low-voltage drive and features low-saturation outputs in an ultra-miniature slim package. The LB1938FA provides forward, reverse, brake, and standby modes controlled by two input signals, and is an optimal DC motor driver for notebook personal computers, digital cameras, cell phones, and ...
Installed with the Freescale MPC17531 DC motor driver ...
Description:
Installed with the Freescale MPC17531 DC motor driver ICDual Full-Bridge Drivers installed (can drive 1 or 2 small DC motors, or one 2-phase stepping motor)Can control high-speed 200 k Hz PWMs Equipped with low power consumption mode and circuit to prevent faulty operation under low voltage Small Module, 16-pin DIP, ...
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver ...
Description:
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver expansion board based on the STSPIN220 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. • Operating voltage range: +1.8 to +10Vdc • Output current: 1.3Arms ...
The Si875x evaluation boards are ideal for driving ...
Description:
The Si875x evaluation boards are ideal for driving power switches and evaluate the Si8751 and Si752 isolated MOSFET drivers.Isolation voltage rating up to 2.5 kV RMS, supporting UL1577 and VDE0884 standards. Supports both DC or AC load switching Jumper to evaluate Miller Clamp function Si8751-KIT with digital input (2.25 V ...