ON Semiconductor STK672-440BNGEVB Motor Driver for STK672-440BN-E

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): JP
Product Details

STK672-440BNGEVB – 2-Phase Microstep Motor Driver Evaluation Board, ON Semiconductor

The ON Semiconductor STK672-440BNGEVB Evaluation Board features the STK672-440A-E (RS 774-0862) 2-phase stepper motor driver with PWM current control.

Its 4-phase distribution stepping motor controller supports five excitation methods: 2 phase, 1-2 phase, W1-2 phase, 2W1-2 phase, and 4W1-2 phase excitations. It can also provide control of the basic stepping angle of the stepping motor divided into 1/16 step units. The motor speed can also be controlled with only a clock signal.

Overcurrent and over-heat protection
Current detection resistors

Motor Driver Evaluation Kits, ON Semiconductor

Specifications
Attribute Value
Power Management Function Motor Driver
Kit Classification Evaluation Board
Featured Device STK672-440BN-E
Discontinued product
Related Products
The LB1909MC is a low saturation voltage stepping ...
Description:
The LB1909MC is a low saturation voltage stepping motor driver IC. It is optimal for motor drivers in 12V system products. Current consumption 0 in standby modeThe compact package (MFP-10S) is adopted. VCC max = 20V, IO max = 0.8ABIP output transistor adoption (Upper and lower total Vo(sat)=0.5V(typical) at Io=400mA). ...
Its heart is a dual channel H-bridge driver ...
Description:
Its heart is a dual channel H-bridge driver chip that can handle current up to 2A per channel, controlled by an Atmel ATmega8L which handles the I2C communication with for example an Arduino. Both motors can be driven simultaneously while set to a different speed and direction. It can power ...
This 18-channel R/C servomotor driver shield is designed ...
Description:
This 18-channel R/C servomotor driver shield is designed for the Arduino UNO microcontroller board but is compatible with all other Arduino boards and the Raspberry Pi via the high speed I²C interface. Typical applications include humanoid and multi-limbed 'walking' format robots. • Standard Arduino UNO Shield form factor• 256 steps ...
Installed with the Freescale MPC17531 DC motor driver ...
Description:
Installed with the Freescale MPC17531 DC motor driver ICDual Full-Bridge Drivers installed (can drive 1 or 2 small DC motors, or one 2-phase stepping motor)Can control high-speed 200 kHz PWMsEquipped with low power consumption mode and circuit to prevent faulty operation under low voltageSmall Module, 16-pin DIP, IC pin layoutLow-loss ...