Festo Pneumatic Cylinder 63mm Bore, 50mm Stroke, DSBC Series, Double Acting

  • RS Stock No. 121-5202
  • Mfr. Part No. DSBC-63-50-PPSA-N3
  • Brand Festo
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

DSBC Series Profile Cylinders - Self Adjusting Pneumatic Cushioning

Festo DSBC series pneumatic cylinders with self adjusting pneumatic cushioning at both ends of the actuator barrel. Featuring a high-alloy steel piston rod provides excellent running performance, low overall weight and long service life. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod in a linear motion. Magnetic piston rods allow contactless position detection via a proximity sensor mounted in slots along the cylinder body.

Self Adjusting Pneumatic Cushioning

The DSBC PPS type self adjusting cushioning pneumatic cylinders provide ideal cushion performance without the need for manual adjustments. The self adjusting cushioning gives a gentle and dynamic travel into the end position, even with changing loads and speeds. Equipped with a special piston as an extension to the main piston the design controls venting of the air cushion that has built up, as a result, no adjusting screw is necessary. Assembly and setting time is reduced using self adjusting cushioning that results in a high potential saving of working hours.

Features and Benefits

Corresponds to ISO 15552 standard
Slots for flush mounting proximity sensors
Low friction design allowing for continuous operation
Adjustable end cushioning helping to reduce noise and vibration
High-alloy steel piston rod with threaded connector
Wide range of stroke length and bore size variants that can be configured to suit a broad range of applications
Double acting operation

How do I mount the pneumatic actuator?

The DSBC series pneumatic round actuators conform to ISO 15552 standards allowing them to be mounted in any position to suit the required application. The ISO 15552 standard establishes metric mounting dimensions for cylinders providing interchangeability of commonly used hydraulic and pneumatic cylinders. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.

Festo ISO 15552 Proflie Cylinders

Attribute Value
Manufacturer Series DSBC
Action Double
Bore 63mm
Stroke 50mm
VDMA Standard 24562
Pneumatic Connection G 3/8
Piston Rod Thread Gender Male
ISO Standard 15552
Maximum Operating Pressure 12 bar
Cushioning Type Air
Dimensions 243.1 x 75 x 75mm
Weight 1.7kg
Length 243.1mm
Stroke Interval Weight 62 g @ 10 mm Stroke
Height 75mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +80°C
Width 75mm
Test Weight 1740 g @ 0 mm Stroke
1 In stock for delivery within 1 working days
Price Each
£ 155.44
(exc. VAT)
£ 186.53
(inc. VAT)
Per unit
1 +
Not available for guaranteed pre 9am/10am delivery
Related Products
Magnetic piston as standard across range Stainless steel ...
Magnetic piston as standard across range Stainless steel piston rod Anodised aluminium alloy barrel and end caps Polyurethane nitrile rubber seals Very compact - approximately one third the length of a corresponding ISO model Spring return on single-acting models Temperature range -5°C to +80°C (consult our technical department for use ...
Compact single and double acting cylinders, considerably shorter ...
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight saving Magnetic piston Proof pressure 15bar Operating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar max Supplied with tapered and parallel ports.
Robust, double-acting guide cylinders with magnetic piston. Bosch ...
Robust, double-acting guide cylinders with magnetic piston. Bosch Rexroth Guide Cylinders include top and side ports, and feature stainless steel guide rods. The plain-bearing cylinders offer elastic cushioning, and may be directly mounted to one another. Guide cylinders are suitable for use within operating environments from -10 to 70°C.
ISOLine™ profile cylinder, 63mm diameter, 50mm stroke, ISO15552. ...
ISOLine™ profile cylinder, 63mm diameter, 50mm stroke, ISO15552. High performance, stability and reliability Polyurethane seals ensure efficient low friction operation and long life Switches can be mounted flush with the profile barrel.