Valsteam ADCA Pneumatic Valve

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): PT
Product Details

Control Valves PV25S

The PV25S control valves are single seated, with 2-way body construction and in-line straight connections. These PV25 valves have been designed for accurate control in any process condition.

Features and Benefits

• Single seated, two way, direct or reverse action valve
• Valve top flange permanently attached to the body
• Metal to metal sealing as standard
• PV25S Cast steel

Application Information

The wide application ranges of these control valves enables their use with saturated and superheated steam, hot and superheated water, air, gases and other non-corrosive fluids.

Materials

Valve body – ASTM A216WCB/1.0619/GP240GH/1.0619
Bonnet – CF8/1.4308
Actuator – S235JRG2/1.0038
Yoke – C45E/1.1191

Pneumatic Control Valves

Specifications
Attribute Value
Default Valve Position NC, NO
Return Type Direct Action
Maximum Working Pressure 3.5 bar
Thread Size 1 1/2in
Available to back order for despatch 18/03/2020
Price Each
£ 1,826.06
(exc. VAT)
£ 2,191.27
(inc. VAT)
Units
Per unit
1 +
£1,826.06
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgings EPDM seals Creep resistant bearings Reinforced nylon handle Reduced risk of contamination by top and bottom seals Operating temperature -10ºC to +120°CWorking pressure 0.9 bar to 10 bar Polished disc.
Speedfit® valves, connectors and couplers, made from Acetal ...
Description:
Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C. May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar at 65°C.Unsuitable for use with stainless steel pipe. Prevents contamination ...
Applications: Steam Min. Set pressure 0.2 barg Overpressure ...
Description:
Applications: Steam Min. Set pressure 0.2 barg Overpressure 10%Blowdown Gases 10%, liquids 20%Connections: Threaded BSP / NPTDischarge coefficients k= 0.55 for gases, k= 0.48 for liquids Design EN-12516-1, EN-4126-1/7DIN 259 and ANSI B2.1Rating PN-40Material Stainless steel 316LMaterials ENTemperature range -10 → +350゚CInspection EN-4126-1/7.
The Parker Hannifin range of stainless steel Instrumentation ...
Description:
The Parker Hannifin range of stainless steel Instrumentation tubing, tube fittings, valves, regulators and manifolds are manufactured to meet the demand for precision-engineered instrumentation components of the highest quality. All products meet or exceed the relevant worldwide standards.,A range of high quality valves for analytical, chemical, oil and gas, power, ...