Festo Pneumatic Cylinder 32mm Bore, 10mm Stroke, ADVC Series, Double Acting

  • RS Stock No. 121-5483
  • Mfr. Part No. ADVC-32-10-I-P-A
  • Brand Festo
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

ADVC Series Double Acting Cylinders

FESTO ADVC series of compact short stroke pneumatic cylinder are up to 60% smaller than standard pneumatic cylinders. Providing maximum productivity in confined spaces. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod. The extensive range of stroke length and bore size variants in the ADVC series are the ideal choice for clamping or applications where installation space is limited.

Pneumatic Cylinder Operation
The ADVC series is a double acting actuator with air applied to extend and to retract the piston in a linear motion to the desired stroke length. Magnetic piston rods allow contactless position detection via a proximity sensor mounted in slots along the cylinder body.


Cylinders are fitted with flexible polymer end cushioning helping to reduce noise and vibration, prolong service life and increase production and productivity.

Features and Benefits

Double acting cylinders with piston rod
Slots for flush mounting proximity sensors
Low friction design allowing for continuous operation
Versatile mounting hole pattern to VDMA 24562
Cushioning requires no adjustment saving maintenance time and cost

How do I mount the pneumatic cylinder?

The ADVC series pneumatic actuators can be mount horizontally or vertically to suit the required application. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.

FESTO Short Stroke Cylinders

Specifications
Attribute Value
Stroke 10mm
Bore 32mm
Action Double
Manufacturer Series ADVC
Pneumatic Connection G 1/8
Piston Rod Thread Gender Female
Dimensions 45 x 45 x 45mm
Length 45mm
Width 45mm
Height 45mm
Maximum Operating Pressure 10 bar
Maximum Operating Temperature +80°C
Minimum Operating Temperature -20°C
3 in stock for FREE next working day delivery
7 available from Europe for delivery within 1 working day(s)
Price Each
£ 57.12
(exc. VAT)
£ 68.54
(inc. VAT)
Units
Per unit
1 - 4
£57.12
5 +
£54.83
Related Products
SMC SV Series employ multi-pin connectors in place ...
Description:
SMC SV Series employ multi-pin connectors in place of conventional lead wires within manifold blocks. The design of the connector-type manifold enables any changes within the manifold station to be greatly simplified. Cassette base type manifolds offer the ultimate in flexibility. Changes that are made to the set-up, whether adding ...
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series cylinders. The non-rotatable cylinders feature a hard anodized aluminium body, ...
SMC Dual-Rod Cylinders with slide bearings (CXSM type) ...
Description:
SMC Dual-Rod Cylinders with slide bearings (CXSM type) or ball bearing slides (CXSL type), suitable for 'pick-and-place' applications, operating with non-lubricated, filtered, compressed air. Dual-Rod Cylinders feature high non-rotational accuracy, dual port locations, and standard magnetic sensing and buffer cushioning. Integral stroke adjustment may be set to standard stroke less ...
Bore sizes 6, 10, 16mm Magnetic piston standard ...
Description:
Bore sizes 6, 10, 16mm Magnetic piston standard Compact design Lubrication not required Male-threaded rod end IP67 rated Proof pressure 1.05 bar Operating pressure 1.2 bar, 6mm dia and 0.6 bar, 10mm/16mm dia (min) 7 bar (max)Ambient and fluid temperature -10ºC to +60°CStroke tolerance +1.0mm, -0mm Rubber bumper cushion at ...