SMC Membrane G 3/8 360 (Inlet)L/min Pneumatic Air Dryer 3/8 +50°C -5°C, 1MPa

  • RS Stock No. 873-2550
  • Mfr. Part No. IDG30A-F03
  • Brand SMC
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): JP
Product Details

IDG Series, Membrane Air Dryer

SMC's Membrane air dryer series IDG is available in a single unit or combination unit style. IDG/M models combine a mist separator and micro mist separator with a single unit. IDG/V models combine a regulator with the IDG/M model. Options available include one-touch fitting exhaust of purge air. If purged air is not exhausted around membrane air dryer, air is exhausted with tubing away from its dryer.

A reliable, efficient and an economical alternative to pressure swing and refrigerant dryer technologies.

Compact and lightweight
No power supply required
Discharged air noise reduced with in-built silencer
No vibration or heat discharge
Modular design for additional filtration
Membrane air dryer series
Single unit style
Various sizes available
Port sizes: 1/8" to 1/2"


Flow rates measured as outlet/purge l/min

Dry Air Systems

Compressed air is an essential power source that is widely used throughout industry. This safe, powerful and reliable utility can be the most important part of a production process. However compressed air will contain water, dirt, wear particles, bacteria and even degraded lubricating oil which all mix together to form an unwanted abrasive sludge. This sludge, often acidic, rapidly wears tools and pneumatic machinery, block valves and orifices causing high maintenance and costly leaks. It also corrodes piping systems and can bring a production process to an extremely expensive standstill. Only compressed air that is totally clean and dry will ensure maximum savings.

Attribute Value
Manufacturer Series IDG
Type Membrane
Inlet Port Size G 3/8
Outlet Port Size G 3/8
Dew Point -20°C
Maximum Flow Rate 360 (Inlet)L/min
Typical Flow Rate 300 (Outlet)L/min
Outlet Port - Thread Size 3/8
Maximum Ambient Operating Temperature +50°C
Minimum Ambient Operating Temperature -5°C
Minimum Process Operating Temperature -5°C
Process Operating Temperature Range -5 → +50°C
Ambient Operating Temperature Range -5 → +50°C
Outlet Port - Thread Standard G
Inlet Port - Thread Size 3/8
Overall Dimensions 291 x 70 x 70mm
Inlet Port Thread Standard G
Maximum Process Operating Temperature +50°C
Overall Length 291mm
Maximum Operating Inlet Pressure 1MPa
Overall Height 70mm
Minimum Operating Inlet Pressure 0.3MPa
Overall Width 70mm
1 In stock - FREE next working day delivery available
Price Each
£ 841.77
(exc. VAT)
£ 1,010.12
(inc. VAT)
Per unit
1 +
Related Products
Parker Balstron cabinet dryers can reduce the humidity ...
Parker Balstron cabinet dryers can reduce the humidity in electrical cabinets to less than 10 %. Dry air is supplied to the cabinet at a dew point of less than -18°C removing moisture from inside the cabinet and keeping out dust. This helps prevent costly breakdowns and maintenance. These dryers ...
Membrane air dryer series Energy saving Single unit ...
Membrane air dryer series Energy saving Single unit style5 sizes available Port sizes: 1/4" to "
Cooling capacity: 200 W, 400 W, 510 W, ...
Cooling capacity: 200 W, 400 W, 510 W, 800 W, 1 kW.Heating capacity: 600 W, 1 kW, 1.2 kW, 1.4 kW, 2 kW.Communication function provided with serial communication (RS232C / RS485).Low power consumption: 440 W (100 V input, 4.6 A), 850 W, 900 W, 1500 W.Single-phase 100 to 240 VAC ...
Compact and lightweight.Temperature stability ± 0.1 ºC.Improved maintenance ...
Compact and lightweight.Temperature stability ± 0.1 ºC.Improved maintenance performance.Heating function available even with no heater.