Allen Bradley PLC Expansion Module Counter 2 Input, 4 Output 24 V dc 118 x 35 x 87 mm

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SG
Product Details

1769-HSC High Speed Counter I/O

Configurable for 2 channel quadrature encoder or up to 4 channel single-ended counter inputs
32-bit count values (+/- 2 billion counts)
High Frequency Ranges of: 1 MHz – X1 quadrature, Up/Down, Pulse Internal and Pulse External, 500 KHz – X2 quadrature, 250 KHz – X4 quadrature
4 on-board high speed outputs and 12 virtual outputs
16 user-defined ranges with each range individually assignable to one of the four counter channels
Safe State control options to allow the module to operate during fault or program condition
Fast/easy start-up and module replacement due to no DIP switches
Compatible with CompactLogix (1) small modular controllers, MicroLogix 1500(2) and the 1769-ADN Series B (3) DeviceNet adapter
Input Voltage Range of –30 to 30 Vdc
Output Voltage Range of 5 to 30 Vdc
Output current drive of 1 Amp per output

Specifications
Attribute Value
For Use With MicroLogix 1500 Series
Module Type Counter
Input Type Digital
Output Type Digital
Number of Inputs 2
Number of Outputs 4
Voltage Category 24 V dc
Length 118mm
Width 35mm
Depth 87mm
Dimensions 118 x 35 x 87 mm
1 In stock for FREE next working day delivery
Price Each
£ 547.00
(exc. VAT)
£ 656.40
(inc. VAT)
Units
Per unit
1 +
£547.00
Related Products
The Micro810 12 Point controller is an economical ...
Description:
The Micro810 12 Point controller is an economical brick-style controller with embedded inputs and outputs. It can accomodate a USB adapter and an LCD module. It can also accomodate any 24V dc output power supply that meets minimum specifications such as the optional Micro800™ power supply. The Micro810 controller functions ...
The EM253 Position Module is an S7-200 special ...
Description:
The EM253 Position Module is an S7-200 special function module that generates the pulse trains used for open loop control of the speed and position for either stepper motors or servo motors. It communicates with the S7-200 PLC over the expansion I/O bus and appears in the I/O configuration as ...
Ideal for use with quadrature encoders up to ...
Description:
Ideal for use with quadrature encoders up to 50kHz, this module suits 5//02 or higher CPU’s and also offers compare, range, rate and sequencer modes of operation. 4 isolated transistor outputs (5 to 30Vdc sink)Count range -32767 to +32767Internal (program) and external reset5V encoder inputs (12 and 24Vdc with pull-up ...
This offers an ideal means of interfacing a ...
Description:
This offers an ideal means of interfacing a shaft encoder to an FX2N PLC. It counts 1 or 2 phase (A/B) inputs up to 50kHz and has two 0.5A, 5 to 24Vdc NPN open collector transistor outputs which are controlled independently from the main program cycle. Counting can be enabled ...