Microchip Technology KSZ9031RNXCC, 1000BASE-T, 100BASE-TX, 10BASE-T, IEEE 802.3 Ethernet Transceiver, 3.3 V, 48-Pin QFN

  • RS Stock No. 177-3847
  • Mfr. Part No. KSZ9031RNXCC
  • Brand Microchip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

The KSZ9031 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core.

Single-chip 10/100/1000Mbps Ethernet transceiver
KSZ9031Mxx feature GMII/MII standard interface with 3.3V/2.5V/1.8V tolerant I/Os
KSZ9031Rxx feature RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths
GMII/MII/RGMII with 3.3V/2.5V/1.8V tolerant I/Os
Auto-negotiation to automatically select the highest linkup speed (10/100/1000Mbps) and duplex (half/full)
On-chip termination resistors for the differential pairs
On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core
Jumbo frame support up to 16KB
125MHz Reference Clock Output
Energy-detect power-down mode

Specifications
Attribute Value
Standard Supported IEEE 802.3, 10BASE-T, 100BASE-TX, 1000BASE-T
Number of Channels per Chip 1
Typical Data Rate 1000Mbit/s
Power Supply Type Single
Typical Operating Supply Voltage 3.3 V
Mounting Type Surface Mount
Package Type QFN
Pin Count 48
Dimensions 7 x 7 x 0.8mm
Height 0.8mm
Length 7mm
Maximum Operating Temperature +70 °C
Minimum Operating Temperature 0 °C
Width 7mm
Automotive Standard AEC-Q100
260 In stock for FREE next working day delivery
Price Each (In a Pack of 5)
£ 2.052
(exc. VAT)
£ 2.462
(inc. VAT)
Units
Per unit
Per Pack*
5 - 5
£2.052
£10.26
10 - 20
£1.892
£9.46
25 - 95
£1.844
£9.22
100 +
£1.798
£8.99
*price indicative
Packaging Options:
Related Products
Linear Technology RS232 Transceiver and Line driver/receivers provide ...
Description:
Linear Technology RS232 Transceiver and Line driver/receivers provide a range of single ended configurations. The data transmission RS232 is also known as TIA-232 supplies serial interface data rates up to 10 Mbps. The RS232 standard states the electrical characteristics and connector for point-to-point modem interface. Data terminal equipment (DTE), data ...
The LTC®2875 is a robust high speed, low ...
Description:
The LTC®2875 is a robust high speed, low power CAN transceiver operating on 3.3V or 5V supplies that features ±60V overvoltage fault protection on the data transmission lines during all modes of operation, including power-down. The maximum data rate has been extended to 4Mbps to support high speed protocols based ...
The Microchip MCP2021 is a LIN Transceiver that ...
Description:
The Microchip MCP2021 is a LIN Transceiver that provides a bi-directional, half-duplex communication interface. Designed to provide a communications interface between a Microcontroller and a Local Interconnect Network (LIN) the MCP2021 complies to LIN 1.3, 2.1 and SAE J2602-2 specifications. Integrated is a 50mA Voltage Regulator with a 5 V ...
The LAN9252 device from Microchip is a 2/3 ...
Description:
The LAN9252 device from Microchip is a 2/3 port Ether CAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber ...