Tektronix TCP305A Oscilloscope Probe, Probe Type: Current 50MHz
- RS Stock No. 781-0810
- Mfr. Part No. TCP305A
- Warranty 1 Year
- Brand Tektronix
Tektronix TCP Series
The Tektronix TCP300 Series of split-core current probes incorporates transformer and Hall effect technology. The TCP300 models TCP303 (796-2683 ), TCP305A ( 781-0810 ) and TCP312A ( 781-0801 ) are used with amplifier TCPA300 ( 764-4391 ), available separately, to provide high performance capability from low level milliamp measurements to the measurement of very high current levels. The TCP0030A ( 781-0807 ) is powered directly by oscilloscopes with the TekVPI interface.
Easy-to-use and accurate AC/DC current measurements
Connects to some Tektronix oscilloscopes using the TekVPI™ probe interface
Provides automatic units scaling and readout on the oscilloscope display
Split-core construction allows easy circuit connection
Typically less than 1% DC gain error
Low Noise and DC Drift
Easy to Degauss and Autozero
Setup controls and probe status/diagnostic indicators on probe hardware and via oscilloscope UI display menu
Tektronix Oscilloscope Probes
The Tektronix current oscilloscope probe offers current measurement capabilities of 50DC continuous. The amplifier, when used with Tektronix provides a wide range of current measurement capability and spans the gap between low-level milliamp measurements to very high current levels. The oscilloscope onscreen readout of magnitude and amps reduces measurement errors with no more hand calculations.
Note:
Requires TCPA300 amplifier available separately
Features and Benefits
• Bandwidth is DC to 50MHz
• Lowest measurable current is 5mA
• Insertion impedance is 0.35ohm at 50MHz
• Rise time is 7ns
• Typically less than 1% DC gain error
• Bare insulated maximum wire voltage is 150V CAT II and 300V CAT II
• Low insertion impedance reduces device under test loading
• Split-core construction allows easy circuit connection
• Status indicators provide visual operating status and notification of potential error conditions - degauss, probe open, overload, not terminated into 50 ohm
• Low DC drift and noise allows improved low level current measurements
Applications
• Development and analysis solutions for designers
• Installers and service personnel in telecom data communication
• Computers
• Semiconductor power electronics environments
Certifications
• UL61010-2-032 approved
• UL61010-1 approved
• CAN/CSA C22.2 No 61010-1 certified
• CAN/CSA C22.2 No 61010-2-032 certified
• EN61010-1
• EN61010-2-032
• CAT II 150V
• CAT II 300V
Note
Requires TCPA300 amplifier (764-4391) available separately
Approvals
UL61010-2-032, UL61010-1, CAN/CSA C22.2 No 61010-1, CAN/CSA C22.2 No 61010-2-032, EN61010-1, EN61010-2-032
| Attribute | Value |
|---|---|
| Probe Type | Current |
| Bandwidth | 50MHz |
| Connector Type | BNC |
| Model Number p | TCP305A |
| Number of Probes | 1 |
| Safety Category Level | CAT II |
| Safety Category Voltage | 150 V, 300 V |
| Series | TCP300 |
| Safety Category | CAT II 150 V, CAT II 300 V |
| Rise Time | 7ns |
