Teledyne LeCroy PPE5KV Oscilloscope Probe, Probe Type: High Voltage, Passive 400MHz 1:100

Technical Reference
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): DE
Product Details

Teledyne LeCroy PPE Series High Voltage Passive Probes

Teledyne LeCroy's range of high voltage passive probes pack both high accuracy and safety. These probes are designed for use with Teledyne LeCroy's large range of oscilloscopes and cover a range from 4kV up to 6kV. The PPE passive probes use hybrid circuitry to minimise ringing and overshoot for brilliant accuracy. Not to mention, these probes come with a foam packed carry case so you can keep them safe on the move. All PPE series probes automatically re-scale any supported Teledyne LeCroy oscilloscope for the appropriate attenuation factor of the probe.

Features and Benefits:

  • Attenuation ratio is 1000:1
  • Input impedance is 50Mohm (6pF each side to ground)
  • 2-meter cable length
  • Operating temperature of 0 °C to 50 °C
  • Can be adjusted for high frequency testing too
  • CAT I certification


  • Testing switching power supplies
  • Motor drives
  • Electric vehicles
  • Testing high voltage
  • Options to test high frequency

What in the box? Included with the probes are a series of attachments. Listed below is what is included;

  • Trimming Tool
  • Sprung hook
  • IC & non-IC insulation tip (Red)
  • 22 cm ground lead
  • BNC adapter
  • Straight and spring contact tips (0.8mm)
  • Two crocodile clips
  • Flexible 4mm security adaptor
  • Security ground lead

Why Teledyne LeCroy?

Teledyne LeCroy oscilloscopes and probes have been designed, manufactured and tested to the highest standards. This ensures high reliability and quality. In the unlikely event, you experience any problems all Teledyne LeCroy digital oscilloscopes are covered by a 3-year manufactures warranty and probes a 1-year warranty.

Attribute Value
Probe Type High Voltage, Passive
Attenuation 1:100
Bandwidth 400MHz
Connector Type BNC
Model Number p PPE5KV
Safety Category Level CAT I
Series PEE
Safety Category CAT I
1 In stock for delivery within 1 working days
Price Each
£ 805.00
(exc. VAT)
£ 966.00
(inc. VAT)
Per unit
1 +
Not available for guaranteed pre 9am/10am delivery
Related Products
The Teledyne Le Croy RP4030 Power Rail Probe ...
The Teledyne Le Croy RP4030 Power Rail Probe meets the specific requirements of those who need to acquire a low-voltage DC signal as part of a: Comprehensive power integrity, digital power management IC (PMIC), voltage regulator module (VMR), point-of-load (POL) switching regulator, or low-dropout regulator testing Complete embedded power management ...
Rated voltage of probe:. Highly flexible 1.2m coaxial ...
Rated voltage of probe:. Highly flexible 1.2m coaxial cable with BNC plug Compensation adjusting screwø 2 mm safety socket for reference connection Isoprobe® II 10:1 450MHz probe Push-on hook clip with additional reference lead (600 V, CAT II)Push-on BNC plug (500 V, CAT II).
This unique probe is designed with two eight-channel ...
This unique probe is designed with two eight-channel pods and simplifies the process of connecting to the DUT. The P6316 can connect directly to 8x2 square pin headers spaced on tenth-of-an-inch centres. When more attachment flexibility is required, the included flying lead sets and grabbers can be clipped on to ...
Dimensions 225 x 265 x 390 mm 2.3kg (2 channel), 225 x 265 x 450 mm 6.5kg (4 channel)32 standard measurements, upto 4 on screen with waveform or all 32 with no waveform Edge, Pulse, Width, Video, Slope (Rise Time) and Alternate Triggers Measure, Math and Wave Recorder functions USB ...