Tektronix TPP0201 Oscilloscope Probe, Probe Type: Passive 200MHz 300V 1:10

  • RS Stock No. 726-0041
  • Mfr. Part No. TPP0201
  • Brand Tektronix
Technical Reference
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): CN
Product Details

Tektronix 200MHz Passive Probes TPP0200 & TPP0201

For use on BNC oscilloscopes with 1MΩ/13pF (TPP0200) and 1MΩ/20pF (TPP0201) inputs.

Supplied with

Retractable hook tip, ground spring, ground lead with alligator clip

Tektronix Oscilloscope Probes

The Tektronix passive voltage oscilloscope probe is for use on BNC oscilloscopes with 1Mohm/13pF input. It has an attenuation of 10X with 10Mohm input resistance.Supplied with: Retractable hook tip Ground spring Ground lead with alligator clipNote:All the products in this range are supplied for use with instruments with a permanent earth connection.

Features and Benefits

Bandwidth is DC to 200MHz Attenuation ratio is 1:10 Input impedance is 10Mohmll12pF Length is 1.3m Maximum common-mode input voltage is 300KV Maximum Input voltage is 300 VRMS CAT II Wide compensation ranges between 15pF and 25pF)

Applications

Relative low frequency measurements Low frequency computer and telecom measurements Power supplies Low frequency amplifiers

Certifications

UL61010-031 approved 2007, CAN/CSA C22.2 No. 61010-031-07 certified IEC61010-031 IEC 61010-031/A1:2008 CAT I 400 VAC CAT II 300 V CAT II 300 VAC

Passive Oscilloscope Probes

Note

All the products in this range are supplied for use with instruments with a permanent earth connection.

Specifications
Attribute Value
Probe Type Passive
Attenuation 1:10
Bandwidth 200MHz
Maximum Common Mode Input Voltage 300V
Connector Type BNC
Model Number p TPP0201
Safety Category Level CAT I, CAT II
Safety Category Voltage 300 V, 300 V ac, 400 V ac
Series TPP
Safety Category CAT I 400 V ac, CAT II 300 V, CAT II 300 V ac
Rise Time 2.3ns
8 In stock for FREE next working day delivery
Price Each
£ 60.00
(exc. VAT)
£ 72.00
(inc. VAT)
Units
Per unit
1 +
£60.00
Related Products
Standard: IEC 1010-1, 600 V Cat. III, deg. ...
Description:
Standard: IEC 1010-1, 600 V Cat. III, deg. 2 if used with a multimeter of the same category. Current probes to measure low DC and AC currents.Easily adapted to all 19 mm standard spacing multimeters.Zero reset using a thumb wheel with disable feature.2 LEDs display overload (red LED) and the ...
The Fluke AC current clamp has a single ...
Description:
The Fluke AC current clamp has a single current rating of 2000A. It is a new age device used with oscilloscopes, digital multimeters, recorders or data loggers. The flexible measuring head allows current measurements on conductors that are hard to reach or inaccessible using the typical clamp-on current probe. The ...
Suitable for use with oscilloscopes, recorders and data ...
Description:
Suitable for use with oscilloscopes, recorders and data loggers a.c. coupled output (no d.c. offset) Voltage output of 3V full scale for each range Fits around conductors up to 160mm diameter Extended battery life and external power supply input Meets BS EN61010 – 1 Cat III 600V Extended working temperature ...
The i30 may be used in conjunction with ...
Description:
The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement. Hall effect sensing of a.c. and d.c. current Power LED warns ...