Teledyne LeCroy ZS1000 Oscilloscope Probe, Probe Type: Active 1GHz 1:10

Technical Reference
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): DE
Product Details

Teledyne LeCroy ZS Series High Impedance Active Probes

The Teledyne LeCroy ZS Series of easy-to-use probes provide high impedance along with an extensive set of probe tips and ground accessories to handle wide-ranging probing scenarios. The high 1 MΩ input resistance and low 0.9 pF (0.6 pF with ZS4000) input capacitance means these probes are excellent for all frequencies. The ZS Series probes provide full system bandwidth with all Teledyne LeCroy oscilloscopes featuring bandwidths of 4 GHz and lower. Small form combines with an extensive standard range of tip accessories to facilitate use in challenging situations as well as in probing test points spaced apart.

Features and Benefits

  • High signal fidelity to 4 GHz bandwidth
  • Low circuit loading – high input impedance and low capacitance
  • Choice of 4 GHz, 2.5 GHz and 1 GHz models
  • 1 MΩ input resistance
  • 0.6 pF (4 GHz) and 0.9 pF input capacitance
  • ± 8 V input dynamic range, ± 12 V offset range
  • Integrated with oscilloscope (ProBus interface for control from oscilloscope front panel)
  • Wide variety of tips and grounds included

Applications

  • Automotive
  • Power applications
  • Motor drive development
  • Product design applications

Note

The ZS1000 is ideal for 200 → 600 MHz oscilloscopes

Supplied with

Square pin adapter, IC tip, bent tip, channel ID clips (set of 4 colours), copper tape pad (x2), freehand probe holder, ground blade (narrow), ground blade (wide), micro-grabber (pair), offset ground-Z lead, pogo ground lead, pogo tip, probe tip - standard (x3), right angle lead (long), right angle lead (short), right angle socket, straight pin lead (long), straight pin lead (short), Y-lead adapter

Specifications
Attribute Value
Probe Type Active
Attenuation 1:10
Bandwidth 1GHz
Connector Type ProBus
Model Number p ZS1000
Series ZS
3 In stock for delivery within 2 working days
Price Each
£ 1,000.00
(exc. VAT)
£ 1,200.00
(inc. VAT)
Units
Per unit
1 +
£1,000.00
Not available for guaranteed pre 9am/10am delivery
Related Products
When you use the oscilloscope in its usual ...
Description:
When you use the oscilloscope in its usual context to show and measure circuit shaft formations, you are working in the most common mode for voltage measurements. The differential probe enhances the oscilloscope probe's measuring capabilities with performance conversion, inverters, motor speed indicators, switch mode power supplies and many other ...
For design, validation, debugging and characterization of common ...
Description:
For design, validation, debugging and characterization of common high-speed serial bus designs including I2C, CAN/LIN, SPI, Serial ATA, Ethernet (Gb E), USB 2.0, Fire Wire (1394b); signal integrity, jitter and timing analysis; manufacturing engineering and test. Accurate measurements for serial and digital applications Excellent common mode rejection - reduces measurement ...
General purpose probes designed for optimal performance with ...
Description:
General purpose probes designed for optimal performance with oscilloscopes. They feature a durable cable and a solid stainless steel probe body encased with a hard, fracture-resistant plastic. General purpose retractable hook tip - hooks onto wires and test points for hands-free probing Ground bayonet - provides short, flexible ground lead ...
New generation of low-cost single-ended active probes with ...
Description:
New generation of low-cost single-ended active probes with Auto Probe interface, compatible with Keysight's Infinii Vision and Infiniium families of oscilloscopes. These probes have the general-purpose, high-speed probing characteristics suitable for wide-ranging applications including digital system design, component design/characterization and educational research. The input resistance and low input capacitance provide ...