Testec TT-SI 9101 Oscilloscope Probe, Probe Type: Active, Differential 100MHz 1kV 1:10, 1:100
- RS Stock No. 512-6438
- Mfr. Part No. TT-SI 9101
- Brand Testec
Differential Probes SI 9010/9110/9101
Supplied with
Probe, 4 x AA batteries, instructions (also supplied with 9101: mains adapter and storage case)
Testec oscilloscope probes
The Testec is an active differential oscilloscope probe that enables a conventional oscilloscope to display and measure in-circuit waveforms that are referenced to high common-mode voltages. It is capable of safely measuring differential voltages up to ±1000V AC. It supports bandwidths up to 100MHz.
Supplied with:
• Probe
• 4 x AA batteries
• Instructions (also supplied with 9101: mains adapter and storage case)
Features and Benefits
• Bandwidth is DC to 100MHz
• Attenuation is 1:10/1:100
• Rise time is 3.5ns
• Differential mode input voltage is 1:10 ±70V (DC+peak AC) or 70Vrms 1:100 ±700V (DC+peak AC) or 700Vrms
• Input impedance is 4Mohm ll7pF each side to ground
• Common mode voltage range is 1:10 ±700V (DC + peak AC) or 700Vrms 1:100 ±700V (DC + peak AC) or 700Vrms
• Non-destructive Max input voltage is 1:10 ±1000V (DC+peak AC) or 1000Vrms 1:100 ±1400V (DC+peak AC) or 1000Vrms
• CMRR (typical) is -85dB at 50Hz and -55dB at 1MHz
• Offset (typical) is <±5mV
• Noise (typical) is 0.9mVRMS
Applications
• Performance conversion
• Inverters
• Motor speed indicators
• Switch mode power supplies
Certifications
• CAT III 1000VAC
| Attribute | Value |
|---|---|
| Probe Type | Active, Differential |
| Attenuation | 1:10, 1:100 |
| Bandwidth | 100MHz |
| Maximum Common Mode Input Voltage | 1kV |
| Connector Type | BNC |
| Model Number p | TT-SI 9101 |
| Safety Category Level | CAT III |
| Safety Category Voltage | 1000V ac |
| Series | SI |
| Safety Category | CAT III 1000 V ac |
| Rise Time | 3.5ns |
