Testec TT-SI 9110 Oscilloscope Probe, Probe Type: Active, Differential 100MHz 1kV 1:100, 1:1000

  • RS Stock No. 448-4351
  • Mfr. Part No. 15120
  • Brand Testec
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): TW
Product Details

Differential Probes SI 9010/9110/9101

Supplied with

  Probe, 4 x AA batteries, instructions (also supplied with 9101: mains adapter and storage case)

Testec oscilloscope probes

The Testec is an active differential oscilloscope probe that enables a conventional oscilloscope to display and measure in-circuit waveforms that are referenced to high common-mode voltages. It is capable of safely measuring differential voltages up to ±1000V AC and 1400VAC/DC. It supports bandwidths up to 100MHz.
Supplied with:
• Probe
• 4 x AA batteries
• Instructions (also supplied with 9101: mains adapter and storage case)

Features and Benefits

• Bandwidth is DC to 100MHz
• Attenuation is 1:100/1:1000
• Rise time is 3.5ns
• Differential mode input voltage is 1:100 ±140V (DC + peak AC) or 140Vrms 1:1000 ±1400V (DC + peak AC) or 1000Vrms
• Input impedance is 4Mohm ll7pF each side to ground
• Common mode voltage range is ±1400V(DC + Peak AC) or 1000Vrms at 1/00 & 1/1000
• Non-destructive Max input voltage is 1:100 ±1400V (DC + peak AC) or 1000Vrms 1:1000 ±1400V (DC + peak AC) or 1000Vrms
• CMRR (typical) is -80dB at 60Hz and -50dB at 1MHz
• Offset (typical) is <±5mV
• Noise (typical) is 0.9mVRMS

Applications

• Performance conversion
• Inverters
• Motor speed indicators
• Switch mode power supplies

Certifications

• CAT III 1000VAC
• CAT III 1400V

Specifications
Attribute Value
Probe Type Active, Differential
Attenuation 1:100, 1:1000
Bandwidth 100MHz
Maximum Common Mode Input Voltage 1kV
Connector Type BNC
Model Number p TT-SI 9110
Safety Category Level CAT III
Safety Category Voltage 1000 V ac, 1400 V ac/dc
Series SI
Safety Category CAT III 1000 V ac, CAT III 1400 V
Rise Time 3.5ns
3 in stock for FREE next working day delivery
20 available from Europe for delivery within 1 working day(s)
Price Each
£ 431.18
(exc. VAT)
£ 517.42
(inc. VAT)
Units
Per unit
1 +
£431.18
Related Products
The Digilent BNC terminated oscilloscope probe is perfect ...
Description:
The Digilent BNC terminated oscilloscope probe is perfect to use with the Analogue Discovery™ in conjunction with the Discovery BNC adapter. • Bandwidth for 1x DC to 6MHz and 10x DC to 100MHz • Selectable 1X/10X input attenuation• Input resistance is 1x1Mohm and10x10Mohm• Input capacitance is 1x 70pF – 120pF ...
The HVD3000A series of high voltage differential probes ...
Description:
The HVD3000A series of high voltage differential probes cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 5 kV electrical apparatus. The table below provides a list of recommended probe models based on specific device under test applications. 1 kV, 2 kV, ...
New generation of low-cost single-ended active probes with ...
Description:
New generation of low-cost single-ended active probes with Auto Probe interface, compatible with Keysight's Infinii Vision and Infiniium families of oscilloscopes. These probes have the general-purpose, high-speed probing characteristics suitable for wide-ranging applications including digital system design, component design/characterization and educational research. The input resistance and low input capacitance provide ...
These high-voltage differential probes are for making, safely ...
Description:
These high-voltage differential probes are for making, safely and accurately, floating measurements in power electronics circuits. They enable conventional earth-grounded Keysight oscilloscopes to be used for floating signal measurements (i.e. where neither point of measurement is at earth ground). Selectable attenuation settings make for highly versatile probes which come with ...