NCV20071SN2T1G ON Semiconductor, Operational Amplifier, Op Amp, RRO, 3MHz 10 kHz, 2.7 → 36 V, 5-Pin TSOP

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

The NCx2007x series operational amplifiers provide rail−to−rail output operation, 3 MHz bandwidth, and are available in single, dual, and quad configurations. Rail−to−rail operation enables the user to make optimal use of the entire supply voltage range while taking advantage of 3 MHz bandwidth. The NCx2007x can operate on supply voltages as low as 2.7 V over the temperature range of −40°C to 125°C. At a 2.7 V supply, the high bandwidth provides a slew rate of 2.8 V/μs while only consuming 405 μA of quiescent current per channel.

Wide Supply Range: 2.7 V to 36 V
Wide supply range suitable for a variety of applications
Wide Bandwidth: 3 MHz typical at Vs = 2.7 V
Compatible with high sped signals up to 3 MHz
Low Supply Current: 405 μA per channel at VS = 2.7 V
Low current consumption
High Slew Rate: 2.8 V/μs typical at VS = 2.7 V
High large signal bandwidth
Low Input Bias Current: 5 pA typical
High input impedance

Specifications
Attribute Value
Amplifier Type Operational Amplifier
Mounting Type Surface Mount
Package Type TSOP
Power Supply Type Single
Number of Channels per Chip 1
Pin Count 5
Typical Single Supply Voltage 2.7 → 36 V
Typical Gain Bandwidth Product 3MHz
Output Type Rail to Rail
Typical Slew Rate 2.8V/µs
Maximum Operating Frequency 10 kHz
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Automotive Standard AEC-Q100
Output Current ±100 mA
Length 3.15mm
Dimensions 3.15 x 1.65 x 1mm
Height 1mm
Input Voltage Range 2.7 → 36 V
Minimum Input Voltage 2.7 V
Typical Voltage Gain 118 dB
Offset Voltage ±4.5mV
Rail to Rail Rail to Rail Output
Width 1.65mm
Maximum Input Voltage 36 V
Input Offset Current 500pA
Typical Input Voltage Noise Density 30nV/√Hz
Available to back order for despatch 07/04/2020
Price Each (On a Reel of 3000)
£ 0.181
(exc. VAT)
£ 0.217
(inc. VAT)
Units
Per unit
Per Reel*
3000 - 3000
£0.181
£543.00
6000 +
£0.176
£528.00
*price indicative
Related Products
A range of high performance zero-drift operational amplifiers ...
Description:
A range of high performance zero-drift operational amplifiers from Linear Technology suitable for applications where high precision and negligible DC offset are required. These highly integrated devices are generally chopper stabilized and incorporate internal sample-and-hold capacitors. Typical applications include thermocouple amplifiers, electronic weigh scales, medical instrumentation, strain-gauge amplifiers, DC-accurate active ...
Advanced CMOS operational amplifiers from Linear Technology offering ...
Description:
Advanced CMOS operational amplifiers from Linear Technology offering ultra-low input bias currents and low noise combined with low power consumption and stable operating characteristics. Outputs are typically capable of swinging within 50mV of the supply rails maximizing dynamic range in low supply voltage applications. Input common mode range includes ground, ...
The LMV321 (single), LMV358 (dual) and LMV324 (quad) ...
Description:
The LMV321 (single), LMV358 (dual) and LMV324 (quad) are general purpose operational amplifiers. With such a low consumption and a sufficient Gain Bandwidth Product (GBP), they find applications in circuits of battery supplied and portable equipment. Power supply operation from 2.7 V to 6 VRail-to-Rail input and output Low supply ...
LMR341G is single CMOS Op-Amp with shutdown function, ...
Description:
LMR341G is single CMOS Op-Amp with shutdown function, low supply voltage operation and output full swing. There are suitable for battery equipment. MOS-FET input stage provide low input bias current. It is capable to use for sensor applications. Low operating supply voltage Input Ground Sense, Output Full Swing High large ...