- RS Stock No.:
- 629-2025
- Mfr. Part No.:
- 70011752 T0-1-102/I1H/SVB
- Brand:
- Eaton
- RS Stock No.:
- 629-2025
- Mfr. Part No.:
- 70011752 T0-1-102/I1H/SVB
- Brand:
- Eaton
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
Eaton Enclosed Isolator Switch
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
Features & Benefits
The perfect solution for installing as a safety measure
Used as an emergency switching off/emergency stop device
The basic functions: used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Built-in earth commoning block
Lockable in the 0/OFF position, with up to three padlocks
Totally insulated
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
Used as an emergency switching off/emergency stop device
The basic functions: used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Built-in earth commoning block
Lockable in the 0/OFF position, with up to three padlocks
Totally insulated
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.
Note
Switch power/capacity refers to AC23A use at 380-440V
Note
Eaton formerly known as Moeller
Specifications
Attribute | Value |
---|---|
Number of Poles | 2P |
Maximum Current | 20A |
Mounting Type | Surface Mount |
IP Rating | IP65 |
Power Rating | 13kW |
Voltage Rating | 400V ac |
Electrical Phase | 3 |
Accepts Padlocks | Yes |
Handle Colour | Red |
Series | Eaton Moeller |
Enclosed/Not Enclosed | Enclosed |
Switch Rating | 20A |
Length | 137mm |
Width | 80mm |
Depth | 110mm |
Terminal Type | Screw |
Maximum Operating Temperature | +40°C |
Throw Configuration | Single |
Minimum Operating Temperature | -25°C |
Related links
- Eaton 2P Pole Panel Mount Isolator Switch - 63A Maximum Current IP65
- Eaton 2P Pole Flush Mount Isolator Switch - 20A Maximum Current IP65
- Eaton 6P Pole Isolator Switch - IP65
- Eaton 3P Pole Isolator Switch - 20A Maximum Current IP65
- Eaton 2P Pole Panel Mount Isolator Switch - 32A Maximum Current IP65
- Eaton 2P Pole Surface Mount Isolator Switch - 32A Maximum Current IP65
- Eaton 2P Pole Isolator Switch - 63A Maximum Current IP65
- Eaton 2P Pole Isolator Switch - 32A Maximum Current IP65